My 2007 C30 started out as a standard T5
Slowly started adding bits and pieces !!
Printable View
My 2007 C30 started out as a standard T5
Slowly started adding bits and pieces !!
Attachment 31682
Port and polished lower manifold !
Attachment 31683
Custom 76mm intake !!
Attachment 31684
Upper inlet manifold fitted !!
Attachment 31685
Mazda 3 front brake kit with new discs and red stuff pads !!
Attachment 31686
M66 AWD gearbox
Attachment 31687
Angle/transfer box
Attachment 31688
Running gear parts painted black
Attachment 31689
Gearbox with transfer box on !!
Attachment 31690
Gearbox cleaned and in primer !!
Attachment 31691
Attachment 31692
Gearbox Painted black !!
Attachment 31693
Prop carriers painted black !!
Attachment 31694
Rear subframe cleaned, primed and painted yellow !!
Looking an interesting build
Had it for 4 years just been doing bit my bit got most of the AWD swap done
Just gotta get the AWD harness wired into my loom and possible software needed ,
This was my AWD donor car
Attachment 31696
Attachment 31697
Attachment 31698
[QUOTE=Sam-C30-AWD;813054]Had it for 4 years just been doing bit my bit got most of the AWD swap done
Just gotta get the AWD harness wired into my loom and possible software needed ,
This was my AWD donor car
How's the wiring look? Is it a straight forward thing?
Attachment 31699
This was the section of AWD harness i removed from the V50
Attachment 31700
Attachment 31701
This has to be wired into my car yet
AWD running gear installed prop shaft fitted
Attachment 31704
AWD fuel tank
Attachment 31702
Had my DP Modified to fit
Attachment 31703
Looks like your on top of things.
Does the rear subframe fit up ok?
Everything is a direct fit no modification needed just take parts off and put AWD parts on !!
I am the first individual person to do this swap and its the only one in the Uk ( road car )
Great project!
Must be nice to have the tools/space to be able to do it :D
One of my goals it to have a workshop and a lift :)
Looks an awesome project there.
Always thought a properly set up C30 AWD would be an awesome tool to wipe the smile off the Focus ST/RS boys' faces :lol:
That's what I'm aiming for is to be able to get more grip, lol
It's got a shark stage 3 tune for k04 standard turbo
Makes 310hp And 510nm which I'm hoping will be good once the AWD is working
I also got a spare T5 engine with my donor car which is being Stripped cleaned Ect
Hopefully build it stronger and go k24 hybrid
The spare head is being ported and polished which should be good with both manifolds !!
How did this project go? I just bought a 6spd AWD V50 to convert my Automatic C30! Teardown should begin tonight.
Love this project c30. Love to see a video when it's finished. Do you think this would work on a v70 2009 2.5t
Hello, i dont own a volvo but i have just done the exact same conversion on a focus st using the same parts as both the c30 v50 and mk2 focus are all identical underneath. i found your thread very useful and im just wondering if you managed to finish yours, if not let me know have any issues as iv managed to get it all working.https://previews.dropbox.com/p/thumb...36&size_mode=3