Printable View
Could anyone point me to a removal procedure for the rear brake discs on a C70? I've removed the caliper and the disc appears loose i.e i can wiggle it about, however it only moves about 1/4 of an inch. I reckon there must be something else holding it on, but i can't work out what it is!
I'm working on it just now so any help greatly appreciated.
Cheers
Scott
that wil be the handbrake shoes on the inside of the drum
you need to release them
if its the same as the 850
there is a daisu wheel accessable through the inspection hole
think wobbly dave has done a how to
I've had a look in the inspection hole and can't see a daisy wheel? Not sure what it would look like though to be honest.
I had a look through the How2 section but looks as if Wobbly Dave has done one for the front brakes only!
put the inspecton hole to the top
use a torch and you are looking for a kind of spoked wheel
try this
http://www.vpcuk.org/forums/showthre...ake+adjustment
Thanks for your help, that's it off!
It's easy when you know how!
glad to be of help
I had done a rear one - but for pad removal only...
http://www.vpcuk.org/forums/showthread.php?t=1277
Indeed removing the disk with the inboard drum can be a bit tricky if you have never done it before.