I fancy the idea of v70 phase one dash clocks in my `96 850 t5.
Are these plug and play or is there a mountain of modifications needed?
any help much appreciated.......Jim
Printable View
I fancy the idea of v70 phase one dash clocks in my `96 850 t5.
Are these plug and play or is there a mountain of modifications needed?
any help much appreciated.......Jim
Yes just plug in and use them
You need to remove the black box that plugs into the top of the clocks.
Then just plug in the 850 plugs :)
Here a photo when my 96 850 had std V70 clocks.
http://i1067.photobucket.com/albums/...5/IMAG0299.jpg
It looks much neater. You lose your factory boost gauge, but I dare say that isnt a big issue for most people.
what about the mileage...it s digital in the v70 but mechanical in 850......how does that work
It works ok, the car retain how many miles are on it as it can be extracted from the car, but not sure on p1s if clock mileage is displayed.
The digital clocks retain whatever milage is recorded on them, when I changed my clocks on my R it magically went from 130k to 98.. ;)
I know it's an old thread....but i just did a conversion to s,v70 cluster to my '97 850 n/a(M.4.4 from the factory).
All works as it should,it's plug & play like you said...BUT...SRS light is NOT coming on on a bulb check when key is in pos.II...and with 70 series cluster i 'm getting SRS code 127 for SRS warning light OC or SC to ground.
I'm affraid that this SRS code could disable SRS system,so i put back the original cluster.
For those who run 70 series cluster into 850...
Do you have SRS light on bulb check with all other little lights?
Also can this SRS code for warning lamp prevent SRS system from working?
Attachment 32508
Attachment 32507
I don't think a code like that would stop the system from working, after all it is just a code about the warning lamp.
Also I'm guessing you checked the bulb?
Yes...replaced the bulb....still doesn't work.
Put back the old cluster...SRS light works normaly with bulb check,turns off when i start the car and no codes stored.
Bulb holder or contacts would be my guess :)
Possible different pin-out on s,v70 cluster?
Or somebody messed with the cluster trying to mask SRS light?
However....i need to know for sure can this problem disable SRS system?
What about others who run s,v70 cluster into 850?
Do you have SRS light ON on bulb check?
It's pinout difference.
The wiring on "B" connector for SRS light is different for 70 series cluster.
Wiring diagrams printed...we'll see if we can make it work.
That was going to be my next idea, pinouts.
Let us know how it goes :)
Solved!!!
Attachment 32517
Attachment 32518
Attachment 32519
In order to have properly working SRS warning light and no SRS 127 code stored in SRS system,you just need to add a wire from ignition switch(x-supply,yellow violet wire)to connector "B" on pin B5.
B5 is spare in '96 & '97 850.
That's all.
Great info!
Glad you've got it working
I know this is a very old post.
But I got my answer