Can anyone give me some info, what maf housing can i use, will it cause any issues going to a 3 inch maf?
Cheers
Printable View
Can anyone give me some info, what maf housing can i use, will it cause any issues going to a 3 inch maf?
Cheers
Vauxhal 3.0 omega i think peeps use
You can use a Vauxhall Omega 2.5 housing, but yes it will cause you a whole load of grief unless you get it custom mapped, why do you want a bigger maf housing?
fitting 3inch intercooler piping and wanted the intake to match, looks pretty
ah fair play, is there some sort of power figure before its needed?
Into the high 300 low 400 bhp area
Attachment 24735
As you can see the 850 maxes out @ 800ish kg/hr and the 540 maxes out @ 1100ish kg/hr
So when you are on WOT upto 300 kg/hr more air will be passing the maf sensor which the ecu will not account for.
This will cause the engine to run lean and melt something.
wow, really helpful, thanks for that, so is it the fueling that will be the issue then? i dont have to worry about that power figure yet then...
as said, i got an omega 3.0 one
i made one, think it cost £20 to have it welded together
http://imageshack.com/a/img812/7892/de0z.jpg
are yours all custom mapped for it then?
Frankie, didn't you car go pop because of the maf housing, or am I just remembering something else?
Turbo tuner right? I keep looking at that
I fitted a 3" maf claymore was there and I have an afr gauge it went from 14.7 on idle to over 18 ie off the lean end of the scale be very careful if your thinking of it