S70 exhaust on a C70

Sadly, now I've apparently grown up and bought an XC90 (although a V8, so not all bad) it's time to start looking at moving my S70 on to a new home.

As we all know, these cars are worth far more in bits, but I don't want to break it if I can avoid it.

It has a lovely TME exhaust, cat and DP among other things.
Obviously the DP won't fit as it's a straight flange, but was wondering if the rest of the system would bolt up to the C70 ragtop? Also vice-versa to sell the S70.
I suppose in theory it would, but not sure about chassis bracing, etc getting in the way.

Cheers.

yes if you extend the rear part by approx 6"

That much??

Is that extend the S70 exhaust to fit the C70?

Wouldn't have thought there was that much in it!

there's a difference in part numbers on the TME site, dude
http://www.tme.se/e_main.htm

S70
Attachment 31187

C70
Attachment 31188

Ah yes, S70 rear section looks slightly longer.

Cheers Fella.

When I moved my miltec cat back from the 850R to the black C70 - I had to chop a small section off the tube just behind the furthest rear box, because the bumper is curved and the exhaust tip sticks out like a sore thumb.

as for the downpipe, you could fit a straight flange to the turbo, I have a good one here you can have if you need it.

Quote:

---

Originally Posted by MoleT-5R

as for the downpipe, you could fit a straight flange to the turbo, I have a good one here you can have if you need it.

---

Ooh, cheers Adrian. Good thinking.

Are they easy enough to change?

Don't know if it would make any difference, but the C70 is an LPT, so teeny tiny turbo.

Quote:

---

Originally Posted by Doingitsideways

Ooh, cheers Adrian. Good thinking.

Are they easy enough to change?

Don't know if it would make any difference, but the C70 is an LPT, so teeny tiny turbo.

---

I stick me neck out here, but I'm sure there all the same hot side, so should an easy swap job, just one clamp and bingo, oh plus taking it off in the first place, but should allow you to used your fully system then

Cheers :)

Suppose I could always bolt it on to the DERV for a laugh :lol:

Turbo completely different on that though.

Quote:

---

Originally Posted by MoleT-5R

I stick me neck out here, but I'm sure there all the same hot side, so should an easy swap job, just one clamp and bingo, oh plus taking it off in the first place, but should allow you to used your fully system then

---

They're not all the same hot side, 18t is bigger than 13/16t.

What size is the exhaust 3"?

Yeah

Edit:
Then again, just checked TME's website as Jamesy pulled the pics from above.

70mm DP/cat.
100mm system.

Quote:

---

Originally Posted by stribo

They're not all the same hot side, 18t is bigger than 13/16t.

---

Straight or angled.....or both.... ;)

Quote:

---

Originally Posted by MoleT-5R

Straight or angled.....or both.... ;)

---

Don't confuse me, FFS!

Quote:

---

Originally Posted by Doingitsideways

Don't confuse me, FFS!

---

You said yours was a little turbo, so no problem as far as I see

Quote:

---

Originally Posted by Doingitsideways

Yeah

Edit:
Then again, just checked TME's website as Jamesy pulled the pics from above.

70mm DP/cat.
100mm system.

---

Well I can find a very good home for it if the C70 doesn't want to wear it ;)