the HID's on my old mans 03 S60 have always thrown the bulb failure warning, so today we decided to drill it as described on some internet sites. Resulted in no dimmed beam headlights working at all....
the HID's on my old mans 03 S60 have always thrown the bulb failure warning, so today we decided to drill it as described on some internet sites. Resulted in no dimmed beam headlights working at all....
Well done that man...Don't let it beat you.
keep at it mate you can win!! :)
start off with a 4mm drill bit, go nice and slow other wise you burn the drill out and harden the surface of the bolt. this will be the cause of the snaped drills. or if you have access the a stick...
idea 2 - melt the offending part with a blow torch so you can pull the wheel off.
will need to change the the hub bolt (or possibly full hub) but the wheel may well survive.
Idea 3 - buy...
Try using a masonry drill bit as these have a carbide tip, it will need to be a good quality one. We use them at work to remove broken drill bits all the time. So may help!
Good luck
damn that's a tough one!
Hope you get it sorted.
Mad idea 1 - What about drilling into the remnants with a very fine drill head (2mm or something) repeatedly, weakning it to the point where...
Found some other info on it
See post #2 here
http://www.volvoforums.org.uk/showthread.php?p=624481
Seems to be a common thing
http://www.volvoforums.org.uk/showthread.php?p=344951
And look...
Hi Kid
I hope you will find this of interest......
http://i35.photobucket.com/albums/d157/jod1jod/various/electricseat014.jpg
According to my records the following connections apply, noting of...