After the glaze was Car Lack 68 sealant, again amazing stuff...but no photos, sorry! To finish it all off...Collonite 476S wax. Really happy with the end finish...for now! I feel I could have done...
After the glaze was Car Lack 68 sealant, again amazing stuff...but no photos, sorry! To finish it all off...Collonite 476S wax. Really happy with the end finish...for now! I feel I could have done...
A cautionary tale. . .
I noticed on Sunday a number plate bulb out. OK, it's no biggie, just nip down the accessory shop on Monday and get a couple of capless bulbs. 2 minutes with a scredriver,...
At last I've found some tyre dressing that works in all weathers
...
No not everyone does it :-(
Have a look at this http://www.elitedirect.com/WheelAlignment/Wheel-Alignment.html
They have the Hunter system ... Im sure lots of other places have it as well .......
Just changed the 17" Amaltheas for 17" Comets.
The change in appeqarance is amazing. The new wheels have been completely refurbished and are in the original Anthracite colour...
Chuffed to bits.
...
the offset of a wheel is the distance in mm that the mounting face (which touches the brake disc) is away from the centre of the width of the wheel. ie a wheel with 0 offset will have the mounting...
I think your comments are quite funny considering you spent money fitting parts that the c70 never came out with and were not even on any parts list.
Why would you fit R wheels etc to a c70 for...
I am a hair dresser ahem!!! lol. Didnt have to much choice about the flat at the end of the day.
I know Alan I was ashamed with the dust that was on it :crazy:
Here are a few of mine with the Volvo blinds fitted;
http://www.circle-software.co.uk/temp/volvo/post2/1.jpg
http://www.circle-software.co.uk/temp/volvo/post2/2.jpg
...
Hi All,
Since i've had this car its never quite looked finished to me without the spoiler above the rear window so I finally got round to buying a genuine one from ebay and sent it for painting...
Mine has been fine after the software update and flush I did within three months of ownership. That was nearly 30,000 miles ago, almost 2 years. No problems at all, and I'm now upto 102,000 miles.
...
For information; 1 hours labour + £4 for o-rings - no more leaks.
Better get codes read first though!
Just as well, because I'm sure that one member on here would have suggested you change the whole breaking system, just to be on the safe side.
It's ok guys, I've found the solution...
http://i160.photobucket.com/albums/t164/zaxtax/258Troll_spray.jpg
I don't often get personal. This is, after all, a cyberspace forum where people just get together and chat and work out their solutions. I am, however, willing to make an exception in this case.
...
well apparently iv started something,
according to a certain member (good use of word)
the basis of this forum is to try & help each other,not fleece them,
if a person is looking for help on...
I'd like to third the motion.
It's nothing to do with opinions shown, it's a lack of respect of the users of this forum & a lack of will on your part to accept the advice of (i'd guess by now) 10...
I'm an admin on another forum and I'd have banned this incredibly confrontational, sensationalist idiot. Any takers or is it the season of good will?
This is my only sensible comment in the previous 'pit of stupidity and stubborn ignorance' thread:
These are the bits I replaced, separately and the reasons why I thought they were worn:
Track...
I'm starting a new thread on this cos it looks like the other one's gone WAAAAAAAY off topic!
Before throwing bits at a car to try and mend it please try to find what components require...
AlanG ?
Look in a mirror, if you recognize who you see in it, congratulations! You've just qualified!
So your were just an idiot but now your an idiot with letters after your name.