Oh and make sure you prime the oil line's before starting, remove fuel relay and ht lead and crank for 30 secs to get the oil around the turbo,.
Oh and make sure you prime the oil line's before starting, remove fuel relay and ht lead and crank for 30 secs to get the oil around the turbo,.
Ok in brief........turbo's aren't hard to change on these but you will scrap your nuckles :), 4 nuts holding it to the manifold + 3 oil/water feeds + 2 torxs underneath for the oil return, 19t is a...
Only joking! ;)
I love 340s, well anything old-skool really.
Your best bet though, is to head over to 300mania and have a good butcher's around.
Plenty of knowledgeable lads on there to help...
Don't bother removing the vacuum hose until you've got it off. It only has one coming off the top that goes all the way to the inlet manifold. This is were to connect your BOV to too.
Just 3 10mm...