I am inclined to agree. Get a 1.6 and get fantastic fuel consumption if that is your primary goal when you drive your car.
I am inclined to agree. Get a 1.6 and get fantastic fuel consumption if that is your primary goal when you drive your car.
Yes mate, works on my P1.5 which has phase 2 software. It really is a great app. If you download it and flick through the screens you will see how good it is. My bluetooth cost £10 and works a treat....
Lol, chill Shane ;) polybushing will show up other weaknesses. Have a look at the lower ball joints - jack it up, take the wheel off and start levering things. Probably ball joints, track rods can...
Available from Superflex, if you really need them and sell a kidney
http://www.superflex.co.uk/products.php?cat=423
Just to add I powerflexed the fronts at 100K, the rears are still OK at 185K....
What I believe it to be is... When these cover an amount of miles, there's wear between the driveshafts and hub. This wear manifests itself in a tiny amount of movement which can, but not always,...
20 mate ;)
This should do it ;)
http://www.vpcuk.org/forums/showthread.php?t=38699
I feel/think it would be better because your going to have vacuum from the engine, which will draw the air through the cooler.
I just done my whole brake system with ate super blue dot4. Would highly recommend this fluid.
If you pump out all your old fluid, catch it in bottles then put new stuff in. It comes out blue so u...
a good quality Dot 4 will do (dot 5.1 as a performance upgrade, I believe) I used 4L to fully flush but you don't need that much to do a quick job. Start by bleeding the rear o/s then rear n/s then...
AFRS around stoich (14.7) or Lambda 1 are common in stock/mild turbo cars - they will run richer if component protection is required. Mapping will include running more boost and this is a useful...