Search:

Jeez... my 336 disks under ameltheas seemed close!

http://i1100.photobucket.com/albums/g413/martinrpeachey/projects/DSCF0437_zps88c75677.jpg

I know i know, not the best make in the world, but im finding these tyres are good as the Falkens on my last S60.

I went to All New Tyres in Macclesfield and bought 4 fitted for £202 (215-45-17...

As long as I've had the vehicle, it has had a problem where it stalls after idling for a period of time, most noticibly (and irritatingly) when in traffic. After being sat idling for a bit, I go to...

I remember when I got my Brembo 305s and plod pads, awesome! good work there mate. Silver manifold paint may be more hard-wearing, I used it on mine......

They should do but I would replace with new bolts any way. For the price, it's worth doing.

I drilled one with no problem as well pedro maybe the drill isnt your friend stick to the grinder mate

I successfully drilled the shunt in my previous S60. The drill hole size 1mm .

I bought a spare shunt just in case. But worked fine

Pedro

I recently fitted HID's, and sucessfully drilled the shunt to cancel the bulb failure.

You have to be very careful when drilling the hole.

The power for the dipped beam travels through...

Hi all.

I would like you all to know that i have decided to step down from the admin side of things now that the new crew are in full swing. I will no longer be associated with the running of the...

Hi all,

As you are aware there have been some mod changes over the past week and different people involved in the running of the site and forum.

The reason for this is that due to work...

Had my dice a few years now, essential bit of kit owning a 1998 T6.
Very informative once you find your way round the software.
More than paid for it's self.

S60-MBS, I wouldn't worry too much about the CCM-0021 Air Quality Sensor Internal Fault DTC. I've been using a DiCE with 2011a software and that code was on there from the start. I've cleared all...

Looks like 7, no?

I used cilit bang - kitchen cleaner..... just for an experiment - £2 - 750ml - not as cheap as yours & it dont turn red ,S60-MBS, but super clean n shiny ! : D

is this a long-term offer, i might have some pennies to get Bonny done after Christmas

out of interest what sort of bhp do you get from the ATM tune on a Euro3 D5

i was going to do it via relays, be cheaper lol. I've been looking at DICE on ebay, you can adjust everything with that can't you? How is MissB

If you bring it to me & you are prepared to put the work in I will help you bring it up. You'll need to put your hand in your pocket to pay for claybar & other materials. This time of year is not...

They are kind enough to let me have the use of their ramp for the morning so i can work on my car so ill be there from about 10 ish onwards

try chad on here he is based in brum

where abouts are you bud? i own a valeting company :D lol

It's not too hard a job if done with patience. It can be done by hand but with a volvo, it's probably best to use a machine. I used a 5" angle grinder (no more than 6000rpm) and a foam mop to do...

seriously - I am not mad!!

http://www.howtomendit.com/answers.php?id=195786

http://www.volvoforums.org.uk/showthread.php?t=100185

it does say the spring has to be complete (1a), not quite sure how they can judg that tho

http://img33.imageshack.us/img33/6544/35333112.jpg

Hi
So mine managed to get to this point in his life. Had lights going off and on again, no speed or rev indicators.
Called Volvo and got a quote: 600 quid plus software and labour. So I went to...

. . . in a fortnight.

Well. Nearer 62 to be exact. We've just got back from our annual expedition to France, via Anglesey.

As usual my life continued in its vein of 'one long ££££ up!' and our...