All sorted found the bulb that sits above the rear heated seat switches was smashed and had earthed out tripping the dash illumination out thanks for the help guys
All sorted found the bulb that sits above the rear heated seat switches was smashed and had earthed out tripping the dash illumination out thanks for the help guys
This is the place i used when you pull up and there is a Bentely an Audi R8 and an Aston Martin in the workshop that speaks for its self i think http://www.prestigewheelcentre.co.uk/
it was £60 per wheel because i had the colour matched to my new volvo spare alloy i think an off the shelf colour was £40 per wheel
Hi got my alloys back from the refurbers yesterday had the tyres swapped new centre caps as well so happy with the outcome 2814728148
have you checked the pipe on the inlet manifold by the thermostat had this on mine and the elbow was broken fitted a temp pipe from inlet manifold to the tree before the turbo intake and alls fine
Hi had this fault with mine it was the vac pipe that sits on the end of the inlet manifold by the thermostat its part of the pcv system and runs under the manifold and down to the turbo intake i just...
Anyone looking for a RIP kit should take a look at this standard set up last pic
http://www.ebay.co.uk/itm/281290594415?clk_rvr_id=609227157347
got one off these kits really usefull:funkybana
Look what came today so happy with it and in great condition just need some dry weather to fit 22857
will do james
thanks gents found one last night with japan on it £40 all in thanks again
looks great
At last the British weather came good on Saturday and finally managed to swap the turbo over first time i took it off so 5 hours hours from start to finish and i am well happy with the new...
Hlm are in bromsgrove junction 4 of the m5 they have a web site if you need any futher info
This happened to me a couple of years back damaged alloy and blown tyre took pics of the pot hole and sued got brand new alloy and tyre
All i did was take the front wheels off remove the abs sensor clean the sensor as rust will be stuck to them and then i used a thin screw driver through the sensor hole or you can remove the discs...
i had the same thing apart from the abs light coming on found it to be rusty reluctor rings on the cv joints took my sensors out and gave the rings a good clean got the rust off and the fault went...
nice looking motor great pics
thats one of the turbo intercooler pipes
the pipe should go under the inlet manifold not over the top, across the front of the engine under the dissy cap round and down to the tcp valve which also gets blocked this is where your 4mm should...
hi thats part of the pvc system the little pipes run under the inlet manifold take off the pipe from the air box to turbo and clean out the little black tree did mine and it was blocked all pipes...
have a look on ebay for the model kit made buy tamaya i think then you should get the decals for the model then take them to sign makers then bingo you have a set
would go for a strut brace makes a big diff to handling performance air filter, samco hoses other will let you know on more mods
this link was on the site before it went off line, found it very usefull when i did mine just thought it would be good to put it back up
http://www.lakesidedp.com/uploadpics/pcv/
Hi new car looks good hope the kids are over what happened