Search:

Got one more primary pipe done today before I ran out of gas. Sorry for the poor picture quality- I took them with my phone.
...

Is your wife in the car? As that was my whining noise from passenger side.

Lol no quite, I was a responsible break downer though and rang the highways agency to clear it up!

ill accept your set of canopus wheels as payment for my input :B_thumb:

it is actually easier than the voc thread reads, i did it with mine and found inside the headunit the 3 wires needed are part of the cassette reader and you dont need to have a blank tape inside just...

I use one of these in my S70...
http://www.volvotips.com/index.php/2012/04/20/how-to-install-a-yatour-mp3-usb-module-on-a-volvo-hu-or-sc-radio/

Or another way......

Get some good quality fuel hose of the appropriate diameter of Ebay - 4mm I/d should cover most of it - then systematically replace ALL the vac lines in the engine bay. Check also the IC pipework -...

9/10 times the whine that increases with revs is the Alternator pulley. I had the same whine 2 years ago, a new Alternator put stop to that.
If the Timing belt was changed recently, assuming the...

As above, spares for old t5s don't bring much. Performance upgrades are worth removing, selling separately & then sell the car on whole with a detailed description. Nobody in their right mind is...

What's wrong with it? What problems are you having?

If the price is right and you list the issues, someone may be inclined to take it off your hands as a whole!

(schedule) 10S elbow...sorry...old piping joke

Looks well mate, looks like you are managing all positions up to & including 6GR there

Good to see you are going to build the car again mate .im glad you said one of the fastest volvos in the uk lol .see you on a strip near you matey and you too Pete .

If the eml is on it has stored a fault code. Get the codes read before you change any other parts unnecessarily.

Owen development for all your turbo needs:

http://www.owendevelopments.co.uk/

as for tubular manifolds I wouldn't bother - they are expensive, barely improve flow because the space is so...

You not done this yet?

Jesus, Smithy will be done before you at this rate.

Sounds like you do need a new maf, they should be changed at 100k anyway. You've possibly got an air leak somewhere so would investigate that, also I'd thoroughly clean the tb and replace gasket and...

Maf. My v70r was exactly the same.
Don't be buying cheap, Bosch is the only way to go.

Jays car has been running reliable for ages now and it's his daily lol.he uses a 25 litre fuel cell with twin Bosch 044 pumps .his car has got a hx40 super with billet wheels and twin external...

Not true. Like Smithy earlier stated, it depends on the exhaust size. You can easily match holset to your liking.
Affordable, strong and capable.

Nothing wrong with truck turbos!

Fitted the new housing today so it's all set for external wastegate now also received my throttle body yesterday if frickin huge I'm also going to try a Fiat throttle body to see the fit cheer to...

ebay mate i initially looked for IRON-X but this comes up too and you get more for your buck!

If it moves freely by hand you know its ok, should have a smooth feel.

I'd have a look at the actuator as it sounds like it's sticking.

That was because of your Mrs though.......