Search:

My old T-5 had a 4" outwardly rolled tailpipe that had been robbed from a Cossie!

looks brilliant :)

Nice transformation!

Would that be an Ardnamurchan sticker on the silver tailgate?

That looks really nice!!.. Nothing wrong with having a good looking Derv..

great job even the belfast pictures! seen it over on voc

Different I'll give you that.
I really like it. :)

Very nice!

Nice

Looks very smart.

You can get the brackets from Volvo about 30£.

Usually its just the bracket that rots on the 850's they're quite cheap to replace. Also check that it's riveted to the wheel arch liner, that can cause it to droop quite a bit.

That doesnt look bad all things considered... if its of any use Ade I know of an 850 sat in a scrapyard the same colour as yours, Im sure I could get the wing for about a tenner. Only downside is im...

Here you go:

http://www.volvoclub.org.uk/tech/service/850/AC-HeaterSystem-Auto.pdf

http://www.volvoclub.org.uk/tech/service/850/TroubleshootingWithCodes-Turbo.pdf

I should noticed that yours was a M reg, mine is too

well as far as i could see he was driving pretty quickly but only overtook when he could see nothing was coming the other way, i didnt see him do any dodgy overtaking like round blind bends...

Not sure if it's a common thing or not, my car is mapped to run 1.35 bar of boost which it pretty much holds to red line so not excessive possibly a fault with the cooler from new which hasn't been a...

Mine did the same at about 3500rpm, changed leads and plugs and problem fixed.

These are cheap:

http://cgi.ebay.co.uk/GENUINE-Volvo-Spark-Plugs-TURBO-850-V70-S70-C70-S60-T5-/290500103099?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43a327cbbb

put new spark plugs in alot of people have this ones having a remap

Yep, that is why they call me Crazy - one of many reasons!! :lol: That is mental, it has a hammock that slides out the side!! :D heheeee So if you ever see my Volvo at a show (got a new one now)...

the rear stay quite nice & lined up, you can buy camber adjustment bolts for the front to give more adjustment

http://img194.imageshack.us/img194/2879/10224121398998580211103.jpg
more overloaded...

its been revised already lol, Powerflow would bend the pipe as it was too small for what they use so popped to Machine Mart & bought a hand pipe bender intended for gas pipe. The only problem was it...