Yeah, about 2 tonne of pig iron. :P
Yeah, about 2 tonne of pig iron. :P
good to here you still have her, 850's are the best, they just have something the others lack.
If it were me, I'd use a decent component mid in the front doors, standard tweeters in the dash and coaxials in the rear doors as you suggest.
The dash tweeters add to the sound more than you'd...
My 850 came like that and it sounds fine.
From memory Goeff, the dash tweeters have a built in crossover attatched.
If you wanted ti use new tweeters you'd need new crossovers, otherwise you should be fine
I had the same issue with my C70 ragtop. Clan on that other lesser Volvo forum suggested that there was a known software issue with cabriolet s that causes the roof control module to gradually drain...
Use a multimeter (in series with the +ve connector) to measure current whilst car is switched off. Not sure what readings are considrered normal though!
A quick google has suggested normal draw...
I remember oblark having issues with a temperature sensor playing up.
Just over 12 litres from start to finish.
It took 13L on my 4 speed box,all depends on how dirty it is.DX3 is suitable so not too expensive.
Theres a good how too on youtube
Says in here 3 litres for a fluid change, for P80 cars' 4-speed box
https://www.volvoclub.org.uk/tech/service/850/MaintenanceInfo.pdf (page 12)
But more will be used for flushing as above. I...
Hi,my mechanic friend did one on mine when I first bought it and used 12 litres by the time he'd finished flushing it,so it was red in colour instead of filthy black.
I've read some people using...
Sweet! Keep us updated :)
Cool :D
Had a go myself with the 850 headlights:
http://www.vpcuk.org/forums/showthread.php?37547-850-HID-Projector-Retrofit
Have given up with the headlight glass (defulting the 850 ones),...
He's not wrong!
Just read your thread matey, cracking work
they are all silicone joints, the lengths of straight pipe you'll have to measure up & cut yourself. That list is to make a 76mm rip
It gives the turbo colder air intakes and also helps the turbo to spool up quicker.
Thanks guys, future plans are rip and strut brace off Pete. After September it will be sorn as always till mid April and I am planning on pulling the engine and box out to upgrade the rods, fit a 19t...
This will be the plan... eventually.. Thing is my current system is blowing and just want to have a nicer sound on the cheap while I spent money on more important repairs, yes I should be patient but...
Clutch bled again. I think I had left the slave nipple loose causing the pressure to go.
New lambda probe installed.
Starting issue cured. Hooray!
It was the ignition coil/amplifier. Car bow...
sorry to hear - same boat as you (i.e. C70 with a broken engine).
Well, seeing as the head is coming off, it would be silly not to put a shiny new 16T on there :)
Gutted she was coming along so nicely too bud