Search:

Over the last few weeks both cars had been washed, clayed, polished and waxed. Think it's paid off as both have paintowork like glass to the touch and wet like appearances to look at...


Found a...

Yours and deans aren't autos though, are they. Many people have bent a rod on an auto running a lot less power than a 19t can give.

I'm really anal about things like this, that sticker would have to come straight out again. I like straight, you obviously like bent, but hey ho, YMCA and all that lol. :smileypul

That should be in the over 18' bit ,that's car Porn at its worst.

we have discussed those black series bushes, but after speaking to powerflex felt that they would be too harsh for road use.
powerflex said they are solely made to be about 80% solid, where all...

Right.
My second hid set arrived yesterday. Fitted and tested.

I have now hid 6000k 35 w as normal driving lights - very happy with the output they give.
Makes a huge different to the standard...

Thanks guys.

I do keep looking at it out the office window.

Hope it helps other's out. if the later car has a the early flywheel fitted cut the location lugs on the plug off and fit it the other way round/upside down.

Ok, tried the hid this morning.
Very impressed with it.
Actually put last night h7 100w in the full beams.
They are like candles compare the hid.
Just ordered another set for the full beam .
...

You gonna put eyebrows on it Frankie?

I recon it'll look the puppy's privates!

the car does run properly, i bought it cheap enough to factor in any problem, it will sit where it is until its ready i have 3 other cars to use

Chris Evans ruined by HID lamps. Brilliant! :)

http://www.do88.se/

Whose used these guys before?? Ive seen his shop growin slowly on ebay. They do some pretty cool stuff and very reaonable. Take a look.....

Im going to purchase a 3in intake...

Just fitted my subframe bush inserts that I bought from Sponge over on T5D5, he got the idea from IPD with the aim of stiffening the front subframe on S60 and V70s - a mould was made and after a few...

So, I intend to see if I can upgrade the lighting on the front of my car using cheap Ebay stuff and deciding if a bargain really is a bargain.
I'll be using the cheapest possible kit while keeping...

What about the Volvo handbook?
Also, isn't there a sticker or plate on the underside of the bonnet or on the bulkhead that gives you the oil grade?
Wouldn't bother dropping sump. Just get the car...

Is yours a 1997 V70? If so it will have the M4.4 ecu which does not have a MAP sensor, so it will be the barometric sensor behind the headlight. I've had the code on mine before, I cleaned the...

the barometric pressure sensor is on a bracket behind the headlight next to the extranal temp sensor on a ph1 v70. we did used to sell quite a few of them.

the map sensor is probably on the pipe...

Well after a good scrub up, to coats of polish with a light cut, then a wax Big Rotch gave me his old spoiler for the tailgate, so that was fitted tonight.

Also got the Comets on, although she is...

P0108 Control module Signal too high / signal too low. Intermittent Fault

its probably your MAP sensor or the wiring to it

I moved the car today after near enough a full stage 0. We're waiting on the circlips & vacuum hose & we're laughing.
I took the car out (on a local private road of course) & noticed the car is...

So what you're saying is no-one's allowed to use a car with more power than yours.:hilarious:hilarious

and the answer is..............................£3.48 I must admit I was shocked as I'd read horror stories on this site of main dealer prices but MR King of Halesworth informed me that Volvo dont...

There's been a lot of discussions recently, regarding the purchase and running of Phase 2 ex plod cars so here's some handy information.
I'm basing this on my own experiences with my car and various...

Well she had 4 braided brake lines from swampy fitted,new brake set up on the back and and just new pads in the front `cos not sure what I wanna fit yet.The old callys will be refurbed soon.Dropped...