1.13.2)117mph Tim Williams 850 T5
2.13.2@111mph - Spesh
3)13.3@110 mph woody t5 set at 1.3bar york avon york avon
4)13.3@100.17mph - santa20, lightly modded s60r
5)13.49@104.3mph- Mole T-5R 855...
1.13.2)117mph Tim Williams 850 T5
2.13.2@111mph - Spesh
3)13.3@110 mph woody t5 set at 1.3bar york avon york avon
4)13.3@100.17mph - santa20, lightly modded s60r
5)13.49@104.3mph- Mole T-5R 855...
Damn that Tim.....his last run not only beat me he's knocked me down to fifth as well.....blood cracking run tbf....well done Tim
I forgot to add that it was done with a bent rod too....tap tap tap....:hilarious
Just a quick update been a long journey and a big effort to get to where I am now very happy with the car. Just like to thank Tim Williams for all his time it's now running with a 19t vxr injectors,...
Well just to update things exhaust is now fitted Down pipe and the new mid section is fitted.
Yes the 3 bolts at the turbo did undo without breaking off happy days. Well Tim was happy they did , the...
https://uploads.tapatalk-cdn.com/20170324/ee9927f1937b0690117499f5aa38a7d3.jpg
https://uploads.tapatalk-cdn.com/20170324/469d9475bbef5a3933cc954c8fd88685.jpg
...
Right then here we go
Week on Monday my volvo 850 t5r is going for a respray on the front end and back bumper and boot I have 2 new wings and very good boot .so no more rust [emoji23] [emoji23]...
Not long after I got it back from Tim, I noticed a small drip of fluid under the car, plus the air con had packed up again. I took it to my local specialist (Just Volvo, highly recommended), and he...
Blimey, you've got a good phone if you could hear that!
its a Volvo forum, we all have
The main reason Tim williams did my radiator was as he was already fitting something else which he does quite often.
Sure you have heard about the intercooler he does, I did say I would like one...
good info that tim
No problems at all, as ever I'm always grateful for your experience and advice :) can carry on bolting bits on tomorrow now lol.
I`ll see if he`s spoken to Shem yet.
Thanks Tim, okay that's interesting that these holes are actually for flow to go back down from the head. Either way I would pretty much believe anything you said about these engines given your...
Further to this.....
Hamish has called me and seeing as this has remained an intelligent discussion he has offered one of his maps on my car FOC. He has also offered his dyno and his time...
I tell you what mate, i'd be willing to throw some money into a pot to do just that. Get a car, get an ecu with each of the different remaps, and see what happens on a dyno. How many others would...
I think in both cases, you need to do your research. Even the 'off the shelf' maps may have their downsides.
http://jjsblogspot.com/gallery/d/29-2/1280-tongue-out-smiley.jpg
http://4.bp.blogspot.com/_6h4sDw8OmO4/SLxlNvVTrsI/AAAAAAAAATA/HVxWYVo0O58/s400/Qiki+-+No+Fun+Allowed.JPG
They look quite good, but illegal in several ways! Don't be suprised if you get pulled by the police!
Also I found the noise that the drilled discs created out weighed the fact that they looked nice! Hence why I went back to standard discs.
Probably not. I changed to drilled and grooved 302mm discs, no difference in performance. If your sticking with the standard volvo setup, i'd say stick with genuine volvo discs and pads everytime.
Do what I did, get yourself a Tim!!!
irf just a few points ,, firstly if you think it is over by 40 bhp then that makes everyone elses car over by 40 bhp ,, firstly mine on a dyno dynamics made 310 bhp and 335 lb,s torque , as you know...