My 760 turbo was in Abram for a short while. In August I'll be in Tyldesley and about getting mine MOT'ed. If I've got 5 minutes I could nip round. I have all the green books for the 940 and VADIS....
My 760 turbo was in Abram for a short while. In August I'll be in Tyldesley and about getting mine MOT'ed. If I've got 5 minutes I could nip round. I have all the green books for the 940 and VADIS....
Have a play around with this size calculator :)
29104
29103
I'll send him an SMS
I've now done this and when i did it i ran into the problem of release bearings, i used the cage from my old spent 940 release bearing and fitted it to the brand new 850R bearing making one good...
You can use BPR 7ES plugs, better in my opinion.Cheap as chips, Dont need fancy plugs..
Get AFR gauge, Innovate etc..to monitor air/fuel ratio.
You dont need to get 3" MAF, stick the gubbins of STD...
This is what I made for him, night and day with the old brakes.
love breaking them lol, no going back mate, not after selling all my good stuff, time to start modding the 4 pot, always can take the v70r out for a blast when i need to
LOL they're the same mate, they are tight, I've had mine on my estate and saloon
I have the same Innovate kits, works well, once you connect the gauge to the wideband output, and not the narrowband! lol
sure this is the one i've got LINK, looks like its gone up £20
i've got an Innovate wideband kit which quite a few people use, £140 & never seen any complaints
Keep it up! It's good to see proper volvo's being bettered!
http://i1240.photobucket.com/albums/gg483/gwexhausts/20131007_140043_zps821cf46a.jpg
http://i1240.photobucket.com/albums/gg483/gwexhausts/20131007_140034_zps23b7c7a6.jpg
...
i can bore you with some pics. i build everything including the silencers.
V70r will be 3bar
Yes as long as you use a 4 bar fpr then you could run 18 psi on that turbo .but get the car on the dyno to check afrs before and set the boost till you start to run lean then back it off
Ask as many questions as you like mate this forum is there to help as much as we can .
The standard back box is rubbish mate best stick a straight threw box and that will help it breath too .chips will run on bigger maf and injectors no probs .
Hello mate go into voc on the performance section and you will see a 940 on a dyno and that has no chips at all .see what you think and that car did a 13.9 on the strip with no proper launch...