Hi All,
It has fallen on me to be the bearer of very bad news. Unfortunately Mark (I Want a T5) has passed away.
I personally had only met Mark in person once, he was a really nice guy.
I'm...
Hi All,
It has fallen on me to be the bearer of very bad news. Unfortunately Mark (I Want a T5) has passed away.
I personally had only met Mark in person once, he was a really nice guy.
I'm...
Just thought I'd throw my 2 pence worth in. I was a bit sceptical about fitting one to mine but thought anything that stops some of the crap going into the intercooler had to be worth a go !
Here...
I have the Phase 1 T4 with 312cc injectors,before i look into getting any more Injectors i read on a few Fiat forums that to get more fuel for more power they change the fuel regs for bigger ones.I...
s60r, dunno if the discs are the same size but plenty of people have done it
sorry to bring it back on topic, but i've drove a turbodaily before & the gearboxes are brilliant. Very short shift & direct
the two pipes go to the heater matrix when taking the pipe out u have to be careful it clips out if u pull hard and havrnt pressed the clips u will break a black box which is behind it like i did
Looking good, really like the colour you've used for the cam cover and inlet.
Looks smart
Not that hard to make either! ;)
Looking Good buddy
Very nice, black and black and some more black, looks the business! (maybe some red HT leads to make it super sexxy?)
One question... what is your heatshield shielding? that layout won't stop any...
looks nice and solid mate,you done good job on that thumbs up :)
will you give me a head start because ive only got 140 bhp or on the other hand shall i give you a head start because 140 bhp can surprise peeps lol
whats with the drive shaft in the first picture? is got somting on it near the gear box. is that a shaft from an 850R? with the viscous joint?
Is this any good to you? T35 piping.
http://i790.photobucket.com/albums/yy185/jamesclancy/rebuild2002.jpg
http://i790.photobucket.com/albums/yy185/jamesclancy/rebuild2003.jpg
Like Andy says euro tuning mate got the direct fit it my 850 no messing about with any pipe work and makes a difference if your running mods
the Volvo number i've got is 8699467
http://www.rmeuropean.com/Images/products/large/8699467_COR_54299047.jpg
Pedro, I don't think it's an auto to manual swap, just the engine from an auto being used on a manual car.
Is that right Mongo?
Don't see any probs with the swap, but can't help you regards the...
+1
I have a re-worked 19t and enough torque to overwhelm both tyres even with my Gripper LSD on a dry road in 3rd. It revs happily to 7500 rpm in low gears and 60-100 takes 5.6 secs on a GPS...
Get it to 300whp and spend the rest on the handling and brakes :)
As quicker as mine is now than standard, It's the handling that puts a smile on your face when you can close people down or get...
Best thing to do is look on ebay as its a wider market