Just make sure you need more fuel first. You need more air first. Only then, if you cannt get enough fuel for the air esp at high revs do you need to increase fueling. Best get an RR run once you...
Just make sure you need more fuel first. You need more air first. Only then, if you cannt get enough fuel for the air esp at high revs do you need to increase fueling. Best get an RR run once you...
Any Evo subframe from 1-6 will fit, the only difference is with standard Evo1-3 subframes, you have to shorten one corner as the floor pan is a slightly different shape (5 minute job even with a...
nice slippers
I hope you have good fillings pmsl
How much weight did that save? probably the best part of a kilo?
Doesn't matter as long as the beam pattern is good and the light output is sufficient.
i've read 470cc@3bar
Bargain. Got mine used and I think I paid 70 or 80.
£115 LINK
http://i1189.photobucket.com/albums/z433/x40vol/4d1e_2.jpg
P1 - bearing is small and molded-in to the top mount, sits directly around the strut shaft within the large raised middle portion.
...
Not the first time TMF`s proved himself a top guy who is allways there to help.Hope to c him at one of essex meets again.Well done TMF.
I asked a while ago if anyone had a spare/scrap wheel hub for an 850/V70, so I could machine some new caliper carriers to accommodate my plans for 365mm front brakes using radial calipers.
TFM...
friend of mine who has just uprated his escort cossie to 550bhp used an ebay turbo seller as looked like genuine turbo he was after, was a cheap copy, luckily the turbo failed just when car was...
I think that using something like water or c02 will cause cracking because of the sudden extreme temperature change, although i do think there are possibilties out there. I'm sure you'll come up with...
will more air feeds to the brakes not work?
or a woman lol
I haven't really got any good pictures but here's one :)
Ashok is a very helpful guy. The main problem is getting both Marco and Ashok at their pc at the same time. I was on the verge of getting mine done, but then found Marco is away til mid July. Don is...
the greens from the s60/v70r are fastest flowing of the volvo injectors and a lot bigger than the reds. But the better option is the vxr injectors as these a bigger still, yet they can usually found...
from what he has told me compared to 18t turbo you will be sniffing his exhaust lol
Right, so I fitted the Custom mapped ECU and injectors from Mo's T4 to my phase 1.5 T4 today along with the corresponding immobiliser unit etc from the donor car. I thought I may have a certain...
I've had a lot of advice from various peeps on T5D5 as well as here and they knew mapping was my next hurdle. Mo for some reason decided to break his immaculate 372bhp T4 (worth more in bits I think)...
painted up the brakes, in the end i painted them in 435 saffron pearl and think they look gud, cant wait to get them on, what do you think?
...
there hidden behind the grill ;)
I've decided on a different approach to the graphics, I originally wanted to go the route of a Saab Fighter jet...
so some of this:
...
Try to imagine this on a black 855, on this pic the bit below the bump strip is white, on mine it would be black, I'm not after a true replica, so I can change any part I want.
...
As the car has parts from Subaru, Noble, Mercedes, Renault, Nissan and Vauxhall, I'm not sure what to call it, perhaps Mongrel.