i love a bit of pink, i'm guessing you're more of a brown type of guy? lol
i love a bit of pink, i'm guessing you're more of a brown type of guy? lol
It's my old turbo was fully rebuilt costing nearly 400 notes, there is no for sale thread Andy bought it and was going to fit it but sold the car
andy has a rebuilt 18t for sale
Id be wondering why it snapped in the 1st place, May be worth while checking you engine mounts for excessive movement.
You need to fix.ASAP ,or it will damage the other engine/gearbox mounts.
popping is cool
After market Intercoolers seem to manage without them.
No mate, I guess the hole is there to vent any moisture/oil that gathers in the bottom of the intercooler.
I just put a small screw in it to do my pressure tests.
I would probably test on the boost side of the pipework first so connect to the pipe that runs over the top of the engine first. You won't have to blank anything off as pressure will be affecting...
I found that the rear hub nut cover off the back of a Citroen (think it was some small Citroen or Pug) was just the right size then just drilled a hole in it and pulled a tyre valve through.
It was £50 + vat, but you might get it cheaper for cash ;)
I took in the bare turbo core once I'd rebuilt it and he balanced it there and then.
For pressure testing the D5, I made up a really...
i had the same noise and all it was was the turbo top hose was coming off slightly
Can you not pressure test the system ?. Maybe you have a inlet manifold gasket or even an injector seal that's leaking under boost. I made a simple plug with a tire valve fitted to it that could be...
Boost leak elsewhere maybe? Split/faulty CBV?
Remember how the turbo on my car was quite loud? - I replaced it on Friday and there wasn't much difference in play between the rebuilt one I put in...
Should be ok for that, obviously the later it gets today the more the outside temp will drop and the safer it will be.
As long as you don't push it to hard/long it will probably be ok. Its pretty cold at the moment out side which will help.
that the car has shat itself lol
They were done around 2 Months ago, forgot to say.
Nice mate, just back from the polski hand job?
Hi All,
It has fallen on me to be the bearer of very bad news. Unfortunately Mark (I Want a T5) has passed away.
I personally had only met Mark in person once, he was a really nice guy.
I'm...
Andy, I'll let you know as soon as I know.
i'm growing very fond of this 850r, its gonna be a good un
Nothing wrong with sitting on the finest cuts of David Dickinson. :D
I used 3mm for the switches in my 850, not sure how different the V70 switches are, I'll pop out and have a look at my V70 switches in a bit.
Is the wife in the car, that's normally the droning noise from my car???