So been on the swither, on should I chop the R in against something newer, slower more boring. You know the drill. But instead I have decided to be a proper Volvo driver and buy a dog. Say hello to...
So been on the swither, on should I chop the R in against something newer, slower more boring. You know the drill. But instead I have decided to be a proper Volvo driver and buy a dog. Say hello to...
Hi all bit of an update...
Noticed the exhaust from the centre back is on its last legs (not bad considering its the original) so just waiting for Don from Kalmar Union to get some ferritas...
And nobody seems to have noticed a subtle change to the Gul's appearance.......new headlights, I know they are a bit of a marmite thing a some will love em and some will think I've gone mad, although...
But if you go with that way of thinking, what is the point in buying any car/project that will 'lose' its value?
I know I bought my AWD because I wanted one, it has cost me a fair bit of money...
Just a few pics taken today after a good polish and wax, also fitted a top poly engine mount and had Shemtek work his magic on the ecu :)
28567
28568
28569
28570
28571
28572
28575
28576
Just a small update, got new back discs and pads at the back so all 4 corners sorted now.
28527
Also got a cat back exhaust (thanks S70t5Chris)
Bit of a pain to fit but on now.
28525
Sticks up a...
I have a cone filter going cheap, nearly new and nice n loud :)
Yup, this on Sunday.....
http://www.vpcuk.org/forums/showthread.php?54038-The-first-southern-meet-of-2014
Or this on Feb 8th.....
...
There's a softies meet on Sunday, and I'm organising another meet at Castle Combe if you're interested.;)
claying wont remove swirls. it remove contaminates. you need polish/cutting compound to remove swirls
Gave her a good scrub up polish n wax, She going to have her timing adjusted as this is out slightly, also the tracking is being done tomorrow.
http://img18.imageshack.us/img18/4665/003frg.jpg
...
Anoyed!!!!!!!!!! may need you guys to get thinking! we went to start her yesterday and she just clicked, so 1st thought was dead battery, after trying to charge it still no luck, infact the pump...
Cleaning the ETM only hides the problem really. It's the internals of the ETM that's failing.
I was thinking about James' problem just now and remembered...
...There's a guy on fleabay that...
By the way, mine has just started the erratic idle today (see my post), and in my case it's a new ETM as the butterfly plate has been cleaned by me twice in 12 months and it was never that dirty. Be...
Err, hello! I've done it twice and it's fairly easy. Remove the radiator fan the ETM to intercooler pipe, the boost pipe and then it's 4 x 10mm bolts from unde the ETM holding it in. Take them out...
Wrapped :)
http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash4/249051_10151637534448156_778558346_n.jpg
Coated
http://sphotos-f.ak.fbcdn.net/hphotos-ak-ash4/217029_10151637534643156_622186272_n.jpg
...
Had a blast of a day, got very red though.....first sunburn of the year !
Thanks to Martin (again) for helping with the 'Big Clean' we also managed a few other jobs including tidying up the engine...
Had the afternoon off today so me and Graham could have a go at getting his car looking nice for the Swedish day next week. It was a bloody warm sunny day and I now have a head like a raddish!
Any...
When the engine is warmer, ie standing still ticking over its thinner, Usually if its turbo it will do it straight after boost and you lift off as the oil is getting past the seals, if its valve...
One way amongst others.
Hold down the odometer button
Turn the ignition so all the lights come on
Keep holding the odometer down for 30 secs or until the service light starts flashing
...
I am not sure about your manual but my auto throttle response is now sharp as a razor and that is all after the HLM map Hamish nows what he is doing mate dont worry....but anyone who says fuel...
Hello, done 1000 miles or so miles in my C70 now. Its a 2.4T manual, i am a little disapointed with the power compared to my old 850 T5's, but it is very smooth and has good low down pull, im getting...
Hlm are in bromsgrove junction 4 of the m5 they have a web site if you need any futher info
MORE!!!!
http://i1341.photobucket.com/albums/o753/hybriduno/485326_10151567242588156_136158624_n_zpse2faa4d0.jpg...
Today was engine day :) very pleased with today's progress :D
http://sphotos-c.ak.fbcdn.net/hphotos-ak-prn1/150451_10151564178333156_725682021_n.jpg...