worth a try..
worth a try..
ill maybe beat you to it..
iv got some wee covers that go on the wiper arms.proper volvo ones mind.was going to keep them for when i got another one cos id never seen them before but thats no goany happen..if u want pm me your...
done well with it..looks spot on..
its an 850..bled it just now and ill try it shortly..
igot the proper colour a while ago.cant remeber the code but that five wheel steel you get is exactly the same..
i had an s40 td for a little while and it was a bit of a nightmare.it was a 2002.think the older ones are better..
mine did that.take the fuel sender out from under the back seat and see if its full of crap..
i changed that pipe on mine when mine burst.sure theres a wee springy clip that you pull out at the join.its quite easy..
iv got an mbc and a rica and mine was the same even with the mbc wound right in 0.8 bar to.it was like this for ages till i got another actuator of yosser now it boosts as far as i want it.so get...
everyone that said plugs could be right.cleaned and gapped them and it seems to have sorted it..
i had something like that on my t5.just cleaned and gapped the plugs and fingers crossed its fixed it..posted the code reader first class this morning so you might get it tommorow..
ground nut oil from asda...give it a go..
ground nut oil out of asda.works great and lasts for ages..
if youve got a 850r keep it standard colour..
dont think the turbos are that dear.never fixed mine as id had enough of it.make sure it doest rattle when its ticking over tho as new flywheels are pricey..
got mine about 3mm of the end.rica 304 and a mbc.
wrong button.you sure the driveshaft hasnt popped out?happened to me a while ago.
mine did that the other day.it was the hoop on the top jamming it.push it down then out..
can anybody give me a template or anything for a blanking plate?i could make them at my work probably..
just thought id ask...
i had jip with mine.sure you just touch 5 against one of the wires quickly then wait a bit and it starts flashing.
i went through 3 lambda probes before i noticed the plug on the probe had grease on it.cleaned that of and that was it sorted.so check your connection..
im originally from kilbirnie and used to pedal to lochwinoch on my bmx to get conkers when i was wee..my dash boost guage goes about 3 or 4m of the end of the white at 1.2bar if that helps and iv...
get a boost guage and adjust your actuator.