Took it out, looks like to o ring was in badly so cleaned everything up and all is well.
Now is also not as dead between 5-6k had holding boost there now at 1bar. was dropping to .7 before and that...
Took it out, looks like to o ring was in badly so cleaned everything up and all is well.
Now is also not as dead between 5-6k had holding boost there now at 1bar. was dropping to .7 before and that...
Quite simply BANNED!
Its not the first time you have insulted members.
Carry on lads :)
the standard recirc valve is bolted straight onto the side of the turbo, i've already fitted a blanking plate to the turbo in the pic (triangular plate to the right)
...
all T-5's have a recirc valve as standard, its basically the same as a dump valve but cycles the air back into the inlet instead of venting to the atmosphere. If your planning on fitting a dump valve...
Have look here http://volvospeed.com/Repair/sparkplugs.php
Get them refurbed mate, come back as good as new for about £8 each, search on here for "jimithan"
Here you go.....http://www.vpcuk.org/forums/showthread.php?t=15818&highlight=injector+cleaning
its not too bad a job. just take it steady :) shame your too far away, I would have come and give you a hand.
Here you go, this should explain it Stage 0 Info