So my Nautic V70 R was registered 20 year's ago today, and is about to turnover 195k miles. £170 all in for the MOT today, including track rod ends, exhaust hanger, abs module repair plus a few other...
So my Nautic V70 R was registered 20 year's ago today, and is about to turnover 195k miles. £170 all in for the MOT today, including track rod ends, exhaust hanger, abs module repair plus a few other...
Thanks for your opinions lads
And as it's not costing me anything sitting on my drive I'm thinking I will just keep her for a while and when the light nights come give her a little tlc maybe some...
Baby wipes. Smell nice too :)
To get stubborn marks off, I use these:
http://www.toolstation.com/shop/Cleaning+%26+Pest+Control/d260/Wipes/sd3257/Multi+Use+Wonder+Wipes+/p11364
They get pretty...
For interior plastics the one we overlook most of the time is just plain old warm soapy water and a sponge. Then wipe with a clean damp cloth to remove any residue.
I use this but in semi gloss form, I believe it can got in matt too, brilliant stuff, cleans and shines all in one, quick and easy for interior trims etc ...
I use Autosmart G101 for general cleaning of plastics.
If you are not in the trade or do not have an autosmart dealer near you, you could try Mr Muscles general cleaner ( I think it might be a...
as you say they seem to have disappeared from pfv, polar parts are listing them on ebay if thats any help...
which year v70r are you looking for and is it front or awd ???
I found 1 in my big box of Volvo bolts - I know I have a few more. Please bear with me.
yup buried somewhere but I defo have them.
Send me an address & I'll stick a few in the post.
I have spare bolts if you damage yours
That would be easier :wink:
grind it flat
http://cdn.meme.am/instances/55943198.jpg
Some e5 sockets have a concave face like the one in the pic above. If the bolts are worn it's better if you get one with a flat face if that makes any sense it grips better. I can't find a pic of one...
maybe someone put a 4/5 mm or similar size imperial (5/32") bolt in there. Worst case use a dremel or similar to cut a slot in the bolt head so you can get a screwdriver bit into it
Good luck with...
oem
Volvo oem discs are very good - and occasionally very cheap from RUFE or other dealers when they are having a clearout.
Just got back after a 4 day break in Lake district. Took the volvo S60 d5 and am amazed with fuel economy . Filled it up and got an amazing 960 miles to a tank. Is that normal miles to tank? Best buy...
I have spare bolts if you round the off.
E5 unless the previous owner has butchered it using the wrong size socket.
Used an E5 on the old S70, no problems at all.
Thread below says you can use a 4 mm socket but be careful if you try it!!
http://www.volvoforums.org.uk/showthread.php?t=173546
Proper one looks like...
Pop round mine and I'll read it for you. :)
There must be someone closer that can read this for you...
You need to get it plugged in with some software that reads the abs codes dude. You could be chasing your arse changing the rings.
The soldered joints in the abs ecu can dry out & cause all kinds...
That test worked well on mine, showed no problem. Double check the holes your sticking your probes in, it was a little confusing.
Guy on eBay fixes abs controllers , perfect fix on mine.
DIY...