Search:

Right the BCS is what all your turbo pipes are connected to(1st pic), it's by the air filter and has an electrical plug attached! Just blank off all the ends, I used some pipe I had lying around with...

Yeah mine sits about the -20 mark!!!

It won't show full boost if you just reving it, the car needs to be under load, say in 4th gear them pin it!!! Even then it won't go straight up to full boost, it'll go up gradually and as you get...

Yes as long as you don't go over 15psi boost, you will need to get performance exhaust and at least panel filter for the air intake though!!
That is from my experience with my car but cars are...

If I remember correctly it's the same one you t the dv into!! I had to do mine right near the turbo up the back of the engine as otherwise the pipe wouldn't reach!!!! Careful though make sure you...

Er you don't need to re-map, i'm running a mbc with 14psi on a 2.0t, granted I do have induction decat and 2.5 system but standard turbo! I'm getting over 200bhp, according to a dyno day held at SW...