Search:

Still looks shiny, I spent a couple of weekends machine polishing it prior to sale.

If it's a TRUE OBD code reader you won't get any codes out of it unless they are "Emissions" related. Which this isn't.
Chances are there are faults stored, but it just won't read them.
And as Lee...

Hi Htomi,

That's the one!
Ordered & will be with me in the morning :)
Thanks for that, Etienne.

I got them from here:
http://www.partsforvolvosonline.com/product_info.php?products_id=9510&osCsid=ba03550e149be22a42767c05fa1aef06

I think I.P.D used to sell them as the Daily has a set fitted....

After being parked in my workshop for the last 11 months I finally got round to getting it ready for paint...

Almost forgot, cleared learned values & reset oil counter
http://i32.photobucket.com/albums/d24/BOSOZOKU-1/V70R%20Flash%20Green/IMAG2428_zpsztk6pkyh.jpg...

So on Saturday I serviced the transmission & axles, well nearly all the axles :/
http://i32.photobucket.com/albums/d24/BOSOZOKU-1/V70R%20Flash%20Green/IMAG2384_zpsdeig25ff.jpg...

Thursday was the day I got the D.I.M coded.
Goodbye J.D.M clocks
http://i32.photobucket.com/albums/d24/BOSOZOKU-1/V70R%20Flash%20Green/IMAG2359_zpshrkc0d5v.jpg
Hello U.K D.I.M...

All sorted now

So this is how it looked when I got back after driving through torrential rain for 2 hours
http://i32.photobucket.com/albums/d24/BOSOZOKU-1/V70R%20Flash%20Green/IMAG2215_zps0apebrzb.jpg...

I can't see it being an issue if they are STAINLESS.
I have a set fitted to the daily & I have a set to fit to the Restorection (been sat in my toolbox since July last year ��)
I always used to fit...

I also replaced the horns with these
http://i32.photobucket.com/albums/d24/BOSOZOKU-1/S60R%20Sonic%20Blue/IMAG2091_zpsasysdst9.jpg...

Obligatory gauge sweep shot
http://i32.photobucket.com/albums/d24/BOSOZOKU-1/S60R%20Sonic%20Blue/IMAG2180_zpse1juxz7m.jpg

Welcome message (used this function for service indicator)...

The main problem with that is that the lower valance comes with the bumper.

The V70R front is the same, not sure if this helps. I'm pretty certain the 'R' front bumper is unique to this model due to the foglights shape.
The rear bumper on the other hand looks the same as a...

Looking good there.

How do you find the Ferrita exhaust ? I was looking at that before I finally opted for the T.M.E system.

In regards to the Haldex filter I remember struggling with it on my...

I use Autosmart G101 for general cleaning of plastics.
If you are not in the trade or do not have an autosmart dealer near you, you could try Mr Muscles general cleaner ( I think it might be a...

I don't think it will make your car any faster, well not unless your old valve is worn out any way ?
And from what Tim Williams said the Grey valves handles the slightly higher boost pressure that a...

So after a bit of digging on the net I found that Hella make a sensor for the facelift models.
The Hella part number is 6px012684061....

Ordered these the other month & they finally turned up last week.
http://i32.photobucket.com/albums/d24/BOSOZOKU-1/S60R%20Sonic%20Blue/IMAG1567_zps353kriil.jpg

Before:...

Well here is a bit of a progress update if anyone is interested.

My "Daily" was fitted with an industrial MAC valve (these were sold on another forum by the previous owner).
I had noticed that...

If you are going for a higher flowing down pipe it will need mapping as I believe the rear lambda sensor picks up the additional flow.
I have an MTE map on my daily which I'm happy with, power is...

And lastly I gave it a quick polish & a coat of collinite 476's
http://i32.photobucket.com/albums/d24/BOSOZOKU-1/S60R%20Sonic%20Blue/IMAG1469_zpsvq7z96kq.jpg...

So nothing really exciting has gone on, I had a new screen fitted as it had a couple of chips and it has been an advisory on the M.O.T for the last 6 years !
I have also had the wheel alignment...

I was a bit slow with the camera so, a pic of the gearbox drained :(
http://i32.photobucket.com/albums/d24/BOSOZOKU-1/S60R%20Sonic%20Blue/IMAG1456_zps9vyj1ao5.jpg
Anyway the gear shift has been a...