Well when i come to scrap the shell, you are welcome to come and collect the shell with rear axle , suspension etc etc if you want. For scrap value.
Well when i come to scrap the shell, you are welcome to come and collect the shell with rear axle , suspension etc etc if you want. For scrap value.
I have a reconned M58 and angle gear on my car that im breaking. Blew the originals ,Replaced them along with clutch, then forked out 650 for a custom prop only to find my rear diff was shagged so i...
Process of elimination is a PITA. But rewarding " if " you find the fault
Could it be a suspension bush gone?? Just coincidently after fitting pads/discs???
23986
I recently bought biffs dual exhaust and Bosch maf. And I'm very pleased with results. The exhaust has a none intrusive tone overall but sings a nice note when you boot it. The most impressive thing...
Not braking late enough then biff ..... ;-)
I think you might be on to something. If your not running the AWD then the lack of Prop should allow for more space and an option to run the other side of the transfer box. Im going to get under my...
Mine goes into the intake pipe. Theres a little nipple thing on the underside of the top of the Intake pipe. Mine goes in there...
only £40 from mrg Volvo in chippenham
They guy who did mine say the key is to get the windows immaculately clean prior. And i mean clean. Make sure to use solvent cleaner to get rid of all the grim and crap of the inside of your windows....
Thanks Biff. Im much better now. The bike has gone, so im sticking to 4 wheels where i feel comfortable. I decided to get a tdi polo and keep the volvo instead of selling the bike and volvo to get a...
Hi all, I have been wanting a 3in DP for my Pre ME7 V70R awd. But it seems as though there is nothing off the shelf and apparently there is no way to make one due to the space.
My question is... ...
And if you check their channel they have many Volvo tutorial videos
Only different is the to realease the fuel pressure you undo the blue cap at end of fuel rail and press it like a tyre valve
https://www.youtube.com/watch?v=otzkZ_f3Y3s
I used this Video for my 98 V70 R.
Took about an hour.
Pictures as Promised
Sorry for the rain. Was about to fit all my Mikalor clamps and clean engine. Also fit new hoses and Rad grill to my Fz6. But the rain has made me come in for a cuppa
...
To report back. My Intercooler is fitted, AC removed and full service done. I can report I have noticed huge difference in pick up and boost. Its abit more aggressive than before as it picks up a lot...
Tesco are currently doing a deal on Castrol GTX 10w40 semi sythetic oil, Half price £6 for 2lt. I stocked up last time on this as I do my mrs car and the cars I buy and sell with it. I know they are...
Some subframe bush inserts should sort that out. A guy called sponge on here and t5d5 makes them. About £20-25 per set. Takes about 45mins to install them and all my knocks vanished and car felt...
The major difference I notice was a massive sound difference coupled with a Cone filter The intake sound is LOUD now with a metal pipe instead of Plastic. I love the sound difference. No noticeable...
My pre Me7 is straight
Showroom !!!!
20950 This style
20951 This is with one fitted.. I need some pipe etc to fit them properly. So they will be be done next week
The came from www.Partsforvolvosonline.com
http://www.partsforvolvosonline.com/product_info.php?products_id=8006
The link is to the lights... but these are the new ones i believe... just come...