Thanks for that Claymore
Have been busy lately and have not had time to do much a quick update
the main problem i had was a gear box ratio fault due to the diff ratio the jag was a 3.06 and the...
Thanks for that Claymore
Have been busy lately and have not had time to do much a quick update
the main problem i had was a gear box ratio fault due to the diff ratio the jag was a 3.06 and the...
That should stop it popping off, nice solution Colin
As well as Ovlov I also have a second project which is milking me dry haha
I wanted to race so am competing in some Sprint racing in this I have been building:
...
Chips! TLAO ran over 400bhp on them, that's fine for me for a start. Eventually I'll be looking into MS, I think someone does a plug-n-play job for LH? Not sure what to do on the clutch side of...
All ready ahead of you the oil filter will be fitted with a sandwich plate then line to a external oil cooler.
The water pipe tha runs along the block is a new n/a one as no longer need the extra...
You not done this yet?
Jesus, Smithy will be done before you at this rate.
Jays car has been running reliable for ages now and it's his daily lol.he uses a 25 litre fuel cell with twin Bosch 044 pumps .his car has got a hx40 super with billet wheels and twin external...
Don't be daft.
Pete would never lower himself to being sponsored by Pukka Pies, the pale southern imitation of a proper northern pie like Hollands!
Coordsport do the stuff for the redblock mate .i got wesco pistons and rods from them for mine
Ill be starting my 940 project in next few months, I'll post up some brake pics when I'm fitting it all up.
You'd be better off using a hiab...
... To lift it into a skip :)
Sorted that for you :)
Or 1/2 mile
He'll get the Galaxies! Lol
Do that with a Manc around and it won't be outside your place for long ;)
Smithy has one that hes never going to use.
Good luck. Mine didn't take long to slip, but then Smithy's lasted years...car hasn't been on the road for year though..lol
I'm aware of that as I made a set up for a 740 turbo as pictured above using 25mm wheel spacer. You'd never get 336mm 4 pots under 99% of 17" wheels inc Polaris as there offset means they run close...
With std springs, which limits the front wheel width, you can run 8,5-9 fronts, rear you can run 12, with right offset.
With coilovers on front, I recon you can run 10's, with right offset.
On a...
Been going through the bin files over the last few evenings and have found a "launch control" file :)
Hope to copy this file over to the map that I flashed onto the ECU at the weekend :)
I picked a focus box up for £50, can't remember who I sold it too
looks cracking for an ornament :uglyhamme
Good to see you've made a start Pete, maybe it will be finished before smithy's 940 :hidesbehi
Probably more than you've been in your own!!!
Looks a Sweeeeeeet ride thou
picked these up today from the refurbers just got to order spacers now .they are not deepdish but should look ok when on the car though