I will if I buy it!
I will if I buy it!
Hey all, from the team we wish you a Merry Festive Period :)
you should be able to, my wire was originally put in when i had the interior in
There should be some spare conduits that go through the bulkhead. They have rubber caps on the end with multiple cable glands. There should be spare ones both sides of the car. They then drop down...
my interior's stripped, but you can get a bit of a judgement where it is from this pic
http://i791.photobucket.com/albums/yy196/pedro-fandango/Volvo/mine/BT/Interior/Picture001.jpg
I just used self tappers been absolutely fine and it's been scrapped up a few driveways many times and never cracked, good build quality TC :) however I do know that they don't like gravel traps...
Just done the permanent fit this afternoon, between showers. Yes, used 6 x 6mm bolts with 40mm washers where I could with smaller washers where the splitter narrows near the wheels. Took me half an...
Hey Craig,
Good to see you this morning and I really hope that you sort things out college wise/job wise etc. Thanks very much for the splitter and I was relucant to post this after you having to...
Off the top of my head you will need
engine
ecu
loom & probably fusebox
turbo & pipework
intercooler
intake system
maf maybe the same?
exhaust system (probably complete)
Check out voc. There's a 850 t5 complete for less than £300 - but it's in Scotland. You'd get the engine & associated parts for free once you'd off loaded the shiny bits!
It would be a lot easier to buy a Turbo car to start with, but everything is possible.
Can't advise on the engine swap itself, but I know where there is an accident damaged p1 V70 R awd(phase 2 or 3). It's on a drive in Stourbridge and I have knocked on the house door a few times now...
Fuel cooler, feed pump and oil cooler in.http://i1164.photobucket.com/albums/q568/martin_r_smith/Mobile%20Uploads/DSC_0860.jpg
...
Sooty, you're running P2 wheels so they are 6mm more offset hence the need for spacers on your car as they are 6mm more set in to the arches :)
I had C70 Comets on my car too and no rubbing to...
When/if I sort mine then I will let you know, as your's could be the same issue.
Soon, hopefully in the next couple of months.
Just popped out and had a look. Here's a breakdown from the top (various codes for the same bulb):
Top Cluster:
Indicator - PY21W or 581 - Single contact, has offset locking pins and has an...
I'll have to pop out and check what mine are (same car), but it won't be until tomorrow morning I'm afraid.
Someone did a how to:
http://www.vpcuk.org/forums/showthread.php?15665-Tailgate-Damper-Replacement-(the-Easy-Way)
Quite possibly mate, quite possibly... You do have to actually order them though rather than putting it off/forgetting! lol
You can code/program/pair secondhand fobs just do a search for the procedure. The key though is a stealer job....
This is on a 850 but same principle
http://i595.photobucket.com/albums/tt39/t5pete/Screenshot_2015-05-22-20-14-00_zpsne9kzije.png
I put electric seats in my old c70. Disconnect the battery first and leave it for 20 minutes, otherwise when you disconnect the air bag wires you will get a light on the dash come up. After I fitted...
you'll be able to take the R seats off their subframes and viceversa then fit your manual subframes to the R seats, you could also fit the passenger side to drivers and have firmer bolsters for the...
Glad to hear it. When the MOT had been due with my past Peogeot's I would dread it! Feel a lot more confident with the Volvo's now