Search:

He was as stated in his post from January 23rd.



You REALLY would? Why? Are you looking to purchase this turbo? Or rather, start an online argument with John?

This looks like the one of the cheaper options:

http://shop.klracing.se/sv/artiklar/volvo-s60r-vissa-specialmodeller-45mm.html

Take a peek at how this guy readjusted the pressure plate:

http://www.audiworld.com/tech/eng86.shtml

James, take a look at this site for your flywheel (budget allowing). The S60R/V70R flywheels are very expensive as a thorough search has highlighted (£500-£600) but here it's £379.31. See what your...

Good luck with the CBV - it is a tedious, frustrating install!

:B_thumb:

I'm glad it worked out for you. That original intercooler was battered!

There you go Nick:
http://www.vpcuk.org/forums/showthread.php?t=21654

I've read your AWD Prop shaft woes, how to fix thread - that was top drawer. I picked up a tub of Silkolene Pro RG2 in preparation.

As my S60R has reached 122,000 miles I thought it would be prudent to change the oil seals in the sump/oil pan, plus the pan needed resealing anyway. I picked up an oil pan gasket set 30750783 -...

Surprisingly very little; a hand full. I had to trim the radiator tray - used tin snips. I put a FMIC on my old Golf Mk4 1.8t and that was way more awkward and time consuming than the Volvo.

I just had a look at my PayPal history to see what I used for my FMIC:

http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=400114028314
2.5" TURBO INTERCOOLER PIPE PIPING DIY KIT 64MM BLUE...

Interesting project.Watching.....:eye-poppi

Having searched for as much information as I could on AWD failure I concluded that the sleeve that mates the transmission output to the angle gear input shaft was probably worn, not surprising on a...

Is it the original sensor? If it is and the car is beyond 100,000 miles it's time for a new one anyway.