Just a little taster, the gold paint will be going and be replaced with silver Hammerite.
http://i97.photobucket.com/albums/l204/s60mbs/DSC_0146.jpg
But boy does the car stop now :)
Just a little taster, the gold paint will be going and be replaced with silver Hammerite.
http://i97.photobucket.com/albums/l204/s60mbs/DSC_0146.jpg
But boy does the car stop now :)
Try drilling a 1mm hole in his shunt like I have , so far no issues despite what some internet stuff says. The ECM is nice and cool with no overheat issues etc.IF you need a shunt, I have a spare...
if it needs resetting you know where i am lol.
Theres alot of "Customer programmable parameters" , cant download software as a you need a subscription to Volvo/Vida. SRS, DRL's ,heater settings,window settings,temp settings etc can be done. It...
No probs Duane, Bloody fantastic piece of kit this.Had to force myself to stop playing with car just incase I feck up the settings.
You never know Ben, I do occasionally reside in Livingston and have been found lurking much further north :)
I will give you a shout when ever I am up north.
Hello all,
Been playing with my new Volvo Dice today, connected it to my car and found alot of faults, apart from the heated seats every thing else was a load of cack.
See below screen grab
...
£6 form Costco for 5litres , now thats a bargain :)
New lights much better in performance, look good with the HIDS too, some modifications needed to loom but I found a way with chopping anything, ended up performing open heart surgery on old lights...
Think the fogs flashing with main beam is software or vida issue, mines flash with main beam.
Cheers Frankie didnt recall Chad did that too until you mentioned it.
The mass movement sensor for the alarm is behind the panel.
http://www.partsforvolvosonline.com/product_info.php?cPath=2_546_538_870&products_id=6766
The battery in alarm module has possibly died, You can get a new siren kit from Rufe for £95 delivered to your door.
Hi Duane,Front drop link can be done without removing wheel if you can jack car high enough.Thats the way I done mines anyway using friendly mechanics ramp :)
To add to Pedro,you will need heated seat modules.
A bit late but see if this helps at all.
http://www.volvoforums.org.uk/showthread.php?t=100845&highlight=TCV
HIDs are well worth it, Despite the bo***x spewed by other forums about legality I have not been pulled yet and even the MOT tester said there are no problems along as the headlights are aligned...
Watch this space,When i get delivery of shiney bits from John my power flexed tie bar will be available to a good home.
No sftware involved,just a tick in a box on ViDA or Vadis.Dealers telling you its SW is load of cack.
Have a looksy here ,maybe similar to my old issues.
http://www.volvoforums.org.uk/showthread.php?t=45601
1.) Buy the switch tops for the CCM and replace the blanking plate (about £12 from FRF)
2.) Check fuses (all of mine were already present)
3.) Dealer visit for the following software downloads:
...
repeated
For a second I thought I logged back on to "other" Volvo forums.
You need a VCT2000 Duane but no software as dealers occasionally tell you.My DRLs where turned off in seconds.