Search:

For anyone interested:

I too broke the thermistor on my CCM part number 8651242. I ordered a second hand replacement off eBay that looked IDENTICAL and when it arrived it happened to be a...

Fault fixed.

I can confirm that my '0070' code relating to a faulty pump was in fact a faulty pump and not module as I first thought.

Also, by fitting a spare pump with exact same part number,...

Ahhh I see, I thought it would be more as I think of a hub as the entire assembly but that is literally just the bearing section in the middle - perfect!

Is there any messing about with ABS?

...

Cool thanks :)



My honest advice would be don't bother.

I LOVED the fact that I used to be able to switch between comfort/sport/advanced but the Eibachs make it more like...

Correct - my 4C was on Eibachs with SUM recal... waste of money though, looked great but was uncomfortable as hell.

Not yet.

With keeping in line with the "don't throw money at it" and "take it to a professional" I haven't done any further work although pedal sensor isn't a bad suggest still.

Had anyone on...

Yes bud, following your advice it had an ETM reload and sadly didn't fix the fault.... Or may have fixed one of the many faults?

No no Merc85 meant FRANKIE said buy a donor car :)

I wasn't opposed to taking it there or anywhere to be honest mate, I just wanted to try and get it sorted myself first :)

(Which I failed at miserably haha)

Just wanted to say thank you to Chad from GRN for takin the time to speak to me today about my car.

Will hopefully get it down there this week if they can fit me in.


Thanks again.

Hi Chad.

I really don't know who it was. Whoever it was, they didn't sound as switched on as whoever I've spoken to at GRN before?

I mentioned that I had swapped my throttle position sensor...

You haven't been ignored by me at all. I acknowledge people's points but this weekend was the first opportunity to actually put pen to paper and try and figure the problem out.

Given that there's...

Hold on a second, we've tried, we've failed... and now it's being taken to a dealer this week as suggested - what's your problem????

:eye-poppi

James is fed up with people for knocking other...

I did have the exact same thing - but flogged it when I got rid of my S60 :(

I think for the fact that I can probablynot interpret data as well as a professional, it may be a trip to the...

Just found the quote out:

£154.00 plus VAT which by my calculations makes it £184.80 ????

GSF part number 187 vo 0030. The part number may also be V18790 the quote sheet is a little mis...

No need for these prices when buying a MAF...

GSF sell the genuine article for about £150-200 (obviously not in Volvo packaging) but it should be the original/Bosch unit or whoever makes it from...

Sounds good mate, for added noise remove passenger side footwell carpet (haha joke, but seriously, sounds great) :)

Ok great thanks a lot both.

Ed :)

How they've been usedpreviously does come into it I think.

My 2004 S60R didn't even make it to 110,000 before a cylinder liner gave up. Someone messaged me recently claiming they had approx 200k...

Sometimes mine will feel very on/off if you put your foot flat to the floor. Mine also struggles with inclines I have to constantly change up and down through gears to keep it going.

I'm...

By the way, my problem started off intermittent and gradually got worse.

Now the car won't stay switched on and will cut out when left idling on my driveway. Furthermore, when driven it will just...

Yes James came up with P1133 and P1132 originally.

I'm just not sure Graeme... I just drove it freezing cold and it felt acceptable. May just wait and see which codes it throws up next.

Fit the suspension???

Just pay the petrol to my house and ill do it with you!!

Hmmm that's a fair point.

Shame as I fancied that deeper bumper.

May just be a pioneering maverick as make it fit :p

That's great thanks I had better check for the faulty calipers then and replace if necessary.

I did the B/J's on my S60 and they were a pain in the back side. What a silly design being splined...