Had this as a favourite for sometime.
Easy to use.
http://www.volvocars.com/se/salesandservices/Dack/FalgGenerator/Pages/default.aspx
Click on box under the word VILKEN choose you model and...
Had this as a favourite for sometime.
Easy to use.
http://www.volvocars.com/se/salesandservices/Dack/FalgGenerator/Pages/default.aspx
Click on box under the word VILKEN choose you model and...
There are special wax's for wheels however I just used whatever I had available at the time( Autoglym).
They should take no more than 30 mins a side. Support car safely remove wheel and remove bottom ball joint pinch bolt and lower the arm, the track rod end or the caliper and then you can cut the old...
You can get quick fit cv boots that you cut to size then glue right along the edge, I personally don't trust these in the long term but as your after a quick fix pop into your local parts shop and...
Off the top of my head everything that ataches to the hub appart from drive shaft then depending on which side its on theres a bracket that holds the drive shaft up on the drivers side.
Then pull...
Unsure weather they would allow that but if you nip to volvo or gsf or euro car parts and get a new boot itdoesnt take too long to replace then easily done in the day.
Better to be safe than sorry
you have pm
You'll need the new inlet manifold gasket as you say. For a good price on all the bits required PM Rufe on this forum who offers excellent service (FRF Volvo in Swansea).
If you search for PCV...