It was Mercedes Benz of Edinburgh, via eBay! They quoted me £1,319, for a full set of fronts and rears.
It was Mercedes Benz of Edinburgh, via eBay! They quoted me £1,319, for a full set of fronts and rears.
I'll try and dig it out and let you know
Yeah you can get a flat badge. I did buy one of those too. But I
Like the sticky upy one
The easiest way to actually confirm and not take the sellers view (He or she may not really know) is to pop into your local Dealer with the Registration number and ask them to check on Volvo's...
The top end stereo has the dynaudio sticker on the centre dash grill. Oh how I miss it.
If I was you I would hold out for an 08 model they had a different centre counsel that looked better, and...
It might be worth contacting this guy,
http://volvodiagnostic.com/
He repairs etms , ecus and all sorts of reprogramming , he gets a very good rep for his work, and some stuff is done...
As far as I'm aware you can reprogram the units but you'll need to pay a main dealer to do so, or an indie with the full Volvo software suite. Good luck as I expect Volvo will want you to cough up...
Sounds like a badly corroded or cracked reluctor ring, just give them all a good going over with a wire brush, and check them for cracks.
Usual suspects -
Damaged loom supplying the sensors,
Missing teeth, dirty or cracked reluctor rings,
ABS ECU dry joints.
DTCs should point you in the right direction.
Still repairing...
With my 850, I could hear the motor working but there was no movement. I followed this guide off youtube, and fixed it:-
http://www.youtube.com/watch?v=lGITgKXCBbg
Clear lacquer.
If you can get some, Autosmart Evo 3 worked by hand using a tri-colour pad works extremely well or I think some Halfords stores sell a Meguiar's headlight restoration kit for reasonable money. ...
You need to register here:
...
I think they volvo can give you a online tracker link to see what stage the build is on new cars that are on order.
Yes but it not for a Phase 2 V70/S60 cars.
[QUOTE=Squirtydog;677005]Thanks guys. Great quick advice as always. Sounds like I'll buy a new one and do the job myself. If it is supposed to be a one hour job, it can't take too long even in my...
that is the do88 part, they are also a do88 dealer.
something like this:
http://www.europeantuningshop.nl/index.php?route=product/product&path=1663_2711&product_id=19033
I retail this stuff and it does a excellent job, but id be cautious with it, give it a dam good shake it comes out thick, tbh you would be wise to put a new rad in but if funds doint allow K-seal...
fitting a new rad is easy enough job. id buy a new one of was you. im fitting a alloy one to mine so im will be available im sure itll be the same but if i was you id just get a new one for peace of...
23404 :)
On the 850s there is a vac servo on the brake pipe for the cruise control, (That might spring a leak?)don't know about the p2s
On the T5 it's a tricky one to get to, it's 3 10mm bolts hold it onto the turbo body, if you follow the hose back from the TCV you'll find it on the top of the turbo behind the actuator.
The...
Could be a leak in the recirculating valve on the turbo.
Basically your BOVs diaphragm has sprung a hole & it's probably letting gasses escape.
Unfortunately the only way to check it is to...
only thing i could thing of is a split pipe in the turbo intake pipe. could be anything though.