First of all, i'd get the wheels balanced again. Your dad may be sure he's had them done but, as it's a very cheap job, you may as well have them done again.
Then get the wheels aligned, preferably...
First of all, i'd get the wheels balanced again. Your dad may be sure he's had them done but, as it's a very cheap job, you may as well have them done again.
Then get the wheels aligned, preferably...
A slightly longer video Today
https://www.youtube.com/watch?v=rUGkL7ZBqHg&feature=youtu.be
another sucessfull weekend with great thanks to john n ste as per the usual for giving me a hand with the bits i got absolutely no clue on! this weekend i swapped the interior out for my better...
This doesn't explain mrs Orcas saggy arse, she is not even a car never mind an Estate car.
some more updates from a very productive weekend on the bus. so first up is a better picture of those battery cables showing that on a 7/900 they route them kinda bad causing this chaffing issue new...
I had similar problem with mine and it turned out to be the HT coil.
Me likes that :), going to look the nuts when you transfer all the bits over, good choice
but you gotta be part of the secret 240 society. we have a secret society for us 740 drivers too. we all hide away n talk about faulty fuel guages n headlinings!
Crankshaft Position Sensor .... had exactly same issue on two other cars..replaced them and it never happened again
Could it be related to the actual ignition barrel/switch?
Starter Solenoid
Can you hear the Starter motor clicking? try hitting it with a hammer or similiar if you can get to it.
It will be ME7 being a '99. did Vida show anything?
I had a problem with my car it would not start start left it for a while or half a day and then it started . Then when parked after a while driving would not start again turned out to be fuel pump...
Even better a b230fk same engine but a lot less stressed.its very hard to find a b23et early type with the forged bottom end .modt are also worn to death too .
I mentioned this a couple of times before, but now Webster race engineering have a new website I spotted a couple of pictures of the 240 they fitted a T6 lump into.
I helped with a couple of bits...
Nice looking car mate, it was the 240s when I was younger that made me wont a volvo......
Nice pics, car looks great :)
Sorry, first pic got mixed..
http://i246.photobucket.com/albums/gg105/xtrmjks/Volvo%20940/48672F0B-EEFE-48F3-98D9-AF41CFDC602D_zpsmk9ow4cs.jpg
Heres a blast from the past with some light hearted classic volvo adverts.
http://i856.photobucket.com/albums/ab125/matie69/ad1_zps187db6e1.jpeg ...
Hi Folks
just want to say you've been a great bunch, really appreciate your help, its looks like I've got a excellent Red 850 R lined up directly from here...I'm sure some photos will go up after...
Oh, here's another vid...
http://www.youtube.com/watch?v=xxxfIOeNAKE
Slippery type mate :D
I've got a before and after with mine using the same springs if anyone is interested. Oh and I agree about the rear springs being a little tricky.
...
This blokes you tube feed is a good watch, this is for an 850 but gives you a general idea.
http://www.youtube.com/watch?v=9uXFqVmxXXg
I thought about doing a how to but it was a PITA and I wasn't in the mood.
The front is as easy as it looks.
The back is a bit harder. you need to jack the back up quite high.
Remove the...
I haven't been bothered to sort it lol but just check round the shields and make sure nothing's touching anything else and all the bolts are tight.