Search:

Add a few of these? :P

http://us.123rf.com/400wm/400/400/pkruger/pkruger0602/pkruger060200137/327751-party-whistle.jpg

So am I! To be honest I was really trying to find someone nearby to take the first beta kit but that now seems unlikely, sorry for the resulting delay.

I can release the first kit as long as the...

Here are the brake bias comparison numbers, there are two piston size options on the T30x caliper, 1.38"x4 and 1.62"x2 + 1.75"x2 staggered. Basically if I was going to leave the rear brakes alone and...

Our prototype 331.7x30mm WMS 4 pot kit fits easily behind Titans without wheel spacers if that's any help?

Also at a later date we may have a 347mm kit, but that won't fit behind the Titan - but...

It needn't be M1144's specifically, but yes from where you are now you can get better pads at a later date. You're probably right that you'll get through pads faster due to the grooves/dimples too.

The normal design pads for this caliper sweep over about 40mmm of the disc, but I'm basing this project initially around a special Ferodo version of the pad as it sweeps about 49mm. (they also do the...

I've borrowed a few more OEM bits to help pin down the spec / bias etc - thanks Ant! :-)

"Eek!" I think the Titans will be my main target as they are common - but I can post everyone a pre-cut profile to try in their wheels before batch 1 of brackets starts machining. (or at least send a...

So the satalite is a bit like an "anglular" Titan, with an R on one spoke?

Updated:

330mm / 17":
- Wobbly Dave (17" Comets)
- dalhousie2008 (ie, under 17"Titan/Volan wheels)
- claymore
-...

Cheers for the info so far guys, list updated!



We do have a 6-pot caliper, the T60x - it's about an additional £300+vat/pr over the T30x though. :-)

Initially, solid discs: 302x26 and 330x32

Then later rotors + bells: 298.5x32 and 323x32

:-) Thanks!

I'll need all the numbers (piston diameters etc) before I can be exact about the bias, but here's how we normally do it using the BMW E30 as an example:

Standard E30 with 260mm...

I'm just waiting to find out 100% how things work here on VPCUK, but I thought I'd just say Hi in the meantime! :-) Keri (WMS Brakes)