Afternoon peeps, hope everyone is well,
If you need any info on my old car "Blacky" just ask , good to see she is still around, i did see the ebay advert and contacted the seller to forward my...
Afternoon peeps, hope everyone is well,
If you need any info on my old car "Blacky" just ask , good to see she is still around, i did see the ebay advert and contacted the seller to forward my...
Wife has really taken to the c70 which tbh i didn't think she would, Fixed the roof with a replacement micro switch which are attached the the lifting arms at the rear so now all good.
Could...
Just to update, wishbones actually un thread from the bolts sercuring them, so no need to mess with the box or engine , may help someone ;)
I've got a Housing coming, just in case i cant get away with just a stat ;) got to do the front brakes tonight then going from there.
This the microswitch im after
30251
Thanks for all the kind comments, will keep you guy upto date with progress ;) Oh and will do mr MRP :)
Hi Peep's hope you guys are all good long time no post lol, We now have another Volvo in the family, I bought this for her today as a Valentines gift, Its done space ship mileage lost of little...
Sounds like you have a incorrect flywheel, Blacky ran fine with it switched round. is the sensor a new one? The correct course of action would be to fit the correct flywheel. Wish i could remeber...
Yes buddy you may be able to using a led torch or similar
With the wrong flywheel fitted you will find the colder the weather gets the harder it will become to start, this is due to the signal wire voltage, as this gets less with the colder weather. (not...
I made that mistake,
OBD1 850's have a different flywheel to OBD2
I believe OBD 1s have Holes recesed/drilled into the flywheel
Obd2 have Raised squared lugs on the flywheel.
To Try this out...
Echo Jamest5r :(
Think you will find the issue is with the Maf
Certainly a engine out and strip down, in the mean time sourcing a 2nd engine running blues on a Hlm map would see you out on the road again reletivly quickly and with what should be a reliable car....
Thanks bud, no there replica's of the period ones for the e63 (211) same shape as mine. Just got to sort the centre badges for them now lol
All Volvo t5 plugs are fine tipped and shouldnt be re-gapped, if you need the next gap down choose the correct plug.
yeah ditto lol
I thought the Ap's were awesome on my 850R, also Koni's for shocks ;)
As above started on the engine bay, came up well with a little work even if it is hidden under the cover's, gave it a spray with gt85, worked it with a brass wire brush then buffed it with some...
STUNNING mate! :)
I had a ST 225 with my Diesel MB easy peasy :ices_rofl
Very crude to fit, one of mine had been fitted before? No assembly instructions was told its because it should be fitted by qualified mechanic.
Lots of chatter over bumps, (had to pack out with...
Terrible
Just thought id post this, Cleaned the front arches on the Mb came up really well i thought.
282582825928260
Cleaned the them 1st with GT85 on a rag, then Old engine oil afterwards.
Yes ur right i do drive MB, but ts far from a tractor, Why cant i still be into my Volvo's?? just because i dont own one? Ive had 4 850 t5's, a 854 Gul, a 855R, v70 t5, ph2 v70 t5, and built Blacky's...
You sure the spindles done up tight