Much more aggressive looking, like it!
Much more aggressive looking, like it!
Got the electrics working
https://www.youtube.com/watch?v=cW2OE7XeQfs&feature=youtu.be
Got it all in and working, just waiting for a switch, all in under £100 including the TomTom
...
My new to me s60 pretty much has all the toys except sat nav, so thought I'd try and fit my tomtom in, I hate them stuck to the screen so I got hold of the standard rti screen and bits, (all this has...
It was just somewhere to upload photos to start with. I did use a kinugawa adjustable actuator and it worked really well :)
If you have time to burn, my project thread with different variations
https://www.facebook.com/media/set/?set=a.10151550645345636.1073741827.622255635&type=1&l=2c1d0d81d1
360 was with the...
Me? Was intercooler, 3" rip, 3" dp, cat back, Japanifold, decat, blues, forged rods, lightly ported head, induction kit, 3" intake, 4.4 ecu. I have the same now but with gt30 turbo and gt500...
my kinugawa 19t made 320bhp and 360ft lbs on my 850, very happy with it - until ive gone gt30 :)
2 cylinders next to each other normally means head gasket
Its a 163, I think the face lift came in 2004 but the 185 started in 2005 so depending on manufacturing dates you can get different combos
That's the one I bought, lol! Drove it 260 miles home, drives really well. There actually isn't wear on the bolster, the interior is mint, does have a couple of little issues, alarm service etc. good...
Me too. Put a deposit on an 04 today, facelift with 163bhp engine, 150k but great history, collecting tomorrow :)
thats great, I noticed better economy going 4.4, running a gt30 and instead of my usual 22-24 im getting 26-28, this turbo is going to pay for its self :B_thumb:
https://www.volvoclub.org.uk/tech/service/850/BasicTesting.pdf
A handy link for testing the other bits if needed
ah ok, i think you can rule this relay out then? as if the icv is buzzing its getting its signal from the ecu and the relay is doing its job, can you have someone hold the icv while you crank on put...
I'll get my notes out tomorrow lol, then go through the sensors one by one, have you got a jump lead you can put on the earth then the other on the gearbox/ starter body? Just to check the earth
Or perfos from v/s70 will fit
Id probably say new shocks and 302 brakes, for the best cost effectiveness, I think brakes can start getting really costly beyond this? thats the setup I am going for
I think it's to stop the exhaust hitting the floor if it comes off, if it's the bit I'm thinking of, same thing happened to me and I cut it off and left it off
perspex the rear side glass and run a vent there?
Want one on your roof vent? I imagine the pressure it runs it should be fine although I'm not sure if anyone's done anything as extreme as you
http://www.ebay.co.uk/itm/New-Volvo-850-S70-C70-V70-Mass-Air-Flow-Sensor-Meter-BOSCH-0280217107-MAF-/131074531033?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AVolvo%7CModel%3A850&hash=item1e84...
Hell yes! me first!?!
I put some AN10 to push fit connections and renewed the hoses but kept the metal pipes (just bent them a little) seems to be working well, just make sure you get a decent size oil cooler as I heard...
when I was taking my engine out to do the rods I binned the oil cooler too and did this
27805
27806
No leaks and probably better
Thanks matey. Yeah will look OE, other than perfos to fit 302 brakes it'll stay completely standard, keeping the sips sticker on the back too, lol.