Search:

Lowering springs, assuming they're the right springs for your car, should always be captured at full suspension droop, so wont fall out.
ie. their free length needs to be long enough that they're...

Both look excellent. Great work.
As much as I like a silver x70, the T5R would be my pick of the bunch. :)

If you have standard springs in the car they'll be fine. They're not ideal for more spring rate and lower ride heights though.

No worries. :)
I'd say you're correct - assuming the tapped holes in the caliper are the same as those in the Volvo/ATE caliper, you may even be able to re-use the line for the 302mm brake setup.
...

Can you please provide a bit more detail?
* What car is it for?
* Which calipers are you using?
* Do you know how much longer the lines need to be?

I'm sure you'll get some good responses if...

Also, here's some caliper options via ebay.co.uk -

Ex Focus ST (LS-LV)
http://www.ebay.co.uk/itm/Ford-focus-st-front-calipers-/161661920973?pt=LH_DefaultDomain_3&hash=item25a3cd26cd
...

Excellent link. Thanks for posting it!

This is a good, budget conversion. It's well done and will make a nice difference over stock. It just won't work on a P80 850/C70/S70/V70.



Correct.



The 320mm conversion that we offer is...

Excellent, super neat conversion.
Great work!

Thats a VERY neat looking car and a great idea to swap over to the C70 convertible subframe during normal maintenance work.

94/95 model cars have the larger ABS/TRACS module hanging off the LH tower which, depending on which brace you use, may need to have the bracket modified (in some cases to drop the module down a tad...

Yes they will, though I don't have a pic of a Volan fitted - Titans are about the worst wheel as far as clearance goes.

Here's a Propus wheel fitted though -

http://www.dvs.net.au/misc/3206.jpg

No problem. If you have any specific questions, please do let me know.
16" wheels, despite them fitting over the same calipers and rotors on an S40/V50, will not fit on the 850/C70/S70/V70 as the...

Hi there all,
I figured I'd stick my head in here and offer (hopefully) some useful insight into the 320mm conversion.

A conversion to 320mm brakes is pretty simple and actually requires very...

Super easy. The video above is perfect. Just be a little careful when prying off the dash vents and the small vents on the outer sides of the dash - over here at least they break quite easily.

Brilliant work!

They've offered them for a while.
They're also available with XYZ branding (D2 and XYZ are one and the same).

Excellent looking car.

This kit will be fine.

That scrubs up really well!

It may very well be a faulty MAF, but before doing anything I'll pull the codes for sure.

If it is a MAF, before you buy another one, remove yours, give it a clean with a product like this -...

The lines for 280mm brakes have a different part number to the lines for 302mm brakes.

That said, I've seen cars with 280mm brakes (both very late V70s) that had lines for 302mm brakes fitted from...

This is correct.
The XC90 spring seat supersedes the previous part numbers.
It's a heavier duty spring seat - you wont experience a handling improvement but it will have a longer service life.
...

Excellent find!
Interior looks fantastic!

I'm not too far off being ready for one - I'll let you know shortly.