View Full Version : Gear Knob change.
Andrew
Thursday 30th March 2006, 14:02
Anyone changed one of these on a 70 ?
Any tips/advice/methods ?
Al115
Thursday 30th March 2006, 14:14
Yeah it's easy. Detach gaiter from the bottom, lift it up over the gearknob. Small screwdriver and prise the two clips away slightly while pulling the gearknob, don't break them. Done. :)
Andrew
Thursday 30th March 2006, 14:56
Yeah it's easy. Detach gaiter from the bottom, lift it up over the gearknob. Small screwdriver and prise the two clips away slightly while pulling the gearknob, don't break them. Done. :)
Found the two clips thing - no screws.
fraz13
Thursday 30th March 2006, 15:04
He never said there were screws lol Just use a small screwdriver to prise the clips...
Andrew
Thursday 30th March 2006, 15:11
LOL
Can you tell it's been a very long week.
Andrew
Thursday 30th March 2006, 16:26
LOL
Can you tell it's been a very long week.
Ok went down the hack saw root after 15 minutes frustration. Took me about 45 minutes. The secret with the gator is to use the screwdriver and then push down on mine which will reveal the gar knob mechanism. Use a screwdriver and then pop that off.
Anyway new Heico gear knob fitted.
Andrew.
Vikingxl
Thursday 30th March 2006, 16:35
The only knob changed in mine was the driver
Phuturephantasy
Thursday 30th March 2006, 20:45
The only knob changed in mine was the driver
Now That Tickled Me -
arbee
Thursday 30th March 2006, 21:16
pics....
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.