PDA

View Full Version : New Shiney Bits!!!



Straker
Monday 27th March 2006, 19:56
Right appologies for the poor quality pic. The misses is off with the proper camera so had to rely on the mobile. However hopefully you will share my excitement about my new shiney bits.

As you can see I have installed a BSR optiflow kit and a reverse IC. Engine definately more friskey and if I were to quantify the difference it's almost as good as going from a tank of 95ron to 97. Slightly annoying schooch sound as the waste gate dumps into the induction system but this is balanced by a very nice "induction roar" when you wind up the revs.

Very pleased with the mod and big up to Stuart for supplying the parts. If you have one of these kits let me know your experiances. Oh and I fitted 302mm brakes as well so I can stop the brick. Good job too as the left disk was cracked


:troutslap :slap: :help: :eek: