PDA

View Full Version : gearbox help



4297gaz
Tuesday 8th March 2005, 19:19
ive got the error code 1,2,2 break in s1 sol..i was wondering i know u should change both s1 & s2 but are they expensive and is it a dealer part only..im in leeds area..

Wobbly Dave
Tuesday 8th March 2005, 20:57
s1, whatdaya mean?

:welcome:

Bracer
Wednesday 9th March 2005, 08:47
s1, whatdaya mean?

:welcome:



Solenoid valves (SL, S1, S2, STH), see top photo, sit in the hydraulic system valve housing, which is located beneath the housing cover on the transmission. Solenoid SL regulates the torque converter lock-up function, and valves S1 and S2 control the shifting. These valves are activated by the transmission control module, as is solenoid valve STH, which controls the transmission line pressure.

If there is a code found for an open circuit in one of the shift solenoids and erratic shifting (starting off in second or third gear), it is possible to replace them with the transmission in the car. Its recommended that both S1 and S2 solenoid valves are replaced even though the ohm readings are in specification (10-15 ohms), as its been known that the solenoid valves work intermittently.

And sorry mate I have no idea how expensive these little puppies are :hidesbehi

Wobbly Dave
Wednesday 9th March 2005, 16:26
I will ask my local At specialist and get you a price on the repair if you like?

Your's the AW-50-42 box yes?

Bracer
Wednesday 9th March 2005, 17:36
Told you he would have a word for you didn't I :wink: