View Full Version : Does anyone know why?
The Flying Banana
Saturday 7th January 2006, 17:50
http://cgi.ebay.co.uk/ALLOY-WHEELS-TYRES-VOLVO-18-MEDUSA-S40-V50_W0QQitemZ8027841771QQcategoryZ72255QQrdZ1QQcmd ZViewItem
Does anyone know why they wont fit the 850..what is the difference? Is it spigot ring size or is a spacer needed...nice wheels..getting desperate now for wheels!!!!
After_Shock
Saturday 7th January 2006, 18:15
Yeah because they will fit a Focus as the offsets are all totally wrong for the 850's and as he says all other Volvos.
Engineer
Saturday 7th January 2006, 18:22
The pcd and off-set are in range but the center bore is about 2mm smaller. :slap:
After_Shock
Saturday 7th January 2006, 18:26
Always thought the off set was the problem, didnt know about the centre bore, learn something new everyday! Shame though as their nice wheels.
BlackBeast
Saturday 7th January 2006, 18:37
Centre bore of these alloys are 63.3 if im correct. 850/70 series need 65.
Bolts should be M12 x 1.5. 850/70 series use m14 x 1.5.
Engineer
Saturday 7th January 2006, 18:45
Centre bore of these alloys are 63.3 if im correct. 850/70 series need 65.
Bolts should be M12 x 1.5. 850/70 series use m14 x 1.5.Nothing a good machine shop can't sort out then guys............................
BlackBeast
Saturday 7th January 2006, 23:18
Nothing a good machine shop can't sort out then guys............................
Hmmmmm
The Flying Banana
Saturday 7th January 2006, 23:31
Nothing a good machine shop can't sort out then guys............................
Even that is toooo much hassle for me!!!!
BlackBeast
Saturday 7th January 2006, 23:39
Not for me if the price is right lol Bruce Forsyth just sprung to mind then, cant stand that bloke, anyway, what actual difference will a et52 actually do? Can anyone post a link of how offset actually works, cheers.
arbee
Saturday 7th January 2006, 23:53
Not for me if the price is right lol Bruce Forsyth just sprung to mind then, cant stand that bloke, anyway, what actual difference will a et52 actually do? Can anyone post a link of how offset actually works, cheers.
trouble is, the centre cap may not fir if theyre machined
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.