recirc blank off

[matt_t5r]

Ok hi guys long time no see. Hope Sweden bash was cool. Sorry I couldn't come 😕
any how.... am I right in thinking if I remove the hose on the plate which is on the turbo and hypothetical was to bung the outlet where the hose has been removed and blank where hose terminates... as I'm also using an atmospheric dump valve would this increase the dump valve noise.

As I'm using the oem dump valve am I also to assume that I have effectivly still got my recirc valve but as an atmospheric one instead.

hope this makes sense

[p fandango]

you'll need to actually remove the recirc valve from the turbo & use a blanking plate, or what Martin did in the past was fit a one-way valve so the air couldn't escape back out from the recirc valve.