S60R Driveshaft bolt advice needed

[yorkshire R]

Hi Guys,i'm having problems with the drive shaft bolts coming loose,any tips or any advice if there is upgraded ones etc

[Yosser]

Clean the threads and Loctite them.

I can't remember the exact threadlock that I used but it was a Loctite product that was tolerant of oil. Don't use stud or bearing fit.

This has kept mine quiet since I got the car a year ago.

[Yosser]

I used Loctite 243.

[yorkshire R]

thanks for the advice, i think i will invest in new bolts and get some of the locktite glue

[Harvey]

The XC90 bolts are used to stop the axle ping noise, Eg when you change direction forward then reverse, also if they come loose

They have a rubber cone with washers bonded to it. Here's some photos.

http://i1168.photobucket.com/albums/r499/harveysr/Mobile%20Uploads/2015-12/20151215_170927_zps3gmjbodt.jpg (http://s1168.photobucket.com/user/harveysr/media/Mobile%20Uploads/2015-12/20151215_170927_zps3gmjbodt.jpg.html)

http://i1168.photobucket.com/albums/r499/harveysr/Mobile%20Uploads/2015-12/20151215_172516_zpsxenm9ydl.jpg (http://s1168.photobucket.com/user/harveysr/media/Mobile%20Uploads/2015-12/20151215_172516_zpsxenm9ydl.jpg.html)

http://i1168.photobucket.com/albums/r499/harveysr/Mobile%20Uploads/2015-12/20151215_172504_zpsxqinqbvc.jpg (http://s1168.photobucket.com/user/harveysr/media/Mobile%20Uploads/2015-12/20151215_172504_zpsxqinqbvc.jpg.html)

[yorkshire R]

got the bolts loctite in,now i have a scraping noise when going around some tightish corners.....sounds like something is rubbing but cant see anything.the same is happening to my brothers V70. i think its time to sell and buy something sensible!!

[Redbrick]

18's wearing 235/40 tyres will rub on extreme lock, it is why there is an extra plate on the inside of the wheel arch.

[stribo]

If the noise is only on full lock, it's just rubbing, all P2s do it.