View Full Version : E5 torx
Dannyboy7
Wednesday 11th November 2015, 12:11
Hi been Trying to renovera the ABS module with an e5 Torx bit but it seems not to fot, a bit on the small size to be honest. Has anyone experimentet this or do i need an e 5.5 bit?
Ta
Dan
jamesy12345
Wednesday 11th November 2015, 12:21
Thread below says you can use a 4 mm socket but be careful if you try it!!
http://www.volvoforums.org.uk/showthread.php?t=173546
Proper one looks like http://www.ultimategarage.com/shop/part.php?products_id=5169
stribo
Wednesday 11th November 2015, 13:19
Used an E5 on the old S70, no problems at all.
Redbrick
Wednesday 11th November 2015, 17:52
E5 unless the previous owner has butchered it using the wrong size socket.
Dannyboy7
Wednesday 11th November 2015, 21:44
Hi guys thanks, no it was from my brother only two owners it hasn't been off ill try again.
Thanks for the replies.
Dan
Wobbly Dave
Wednesday 11th November 2015, 22:39
I have spare bolts if you round the off.
Dannyboy7
Saturday 14th November 2015, 10:42
Hi guys thanks for posts I have a new e5 bit with which I will attempt the extraction later. Just out of interest if I go down the repair route and send it off to someone rough price and do they test it first against a known true result to save taking it apart?
Dan
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.