PDA

View Full Version : Intermittent boost levels!



Sweep
Wednesday 2nd September 2015, 17:06
This is driving me crazy now, just when you could do with a bit of oomph under your foot there's not half what you expected there to be.

Occasionally it'll boost fine and dandy just over the white (RICA 304 map), but at other times it can be almost standard if not slightly less.

I've replaced the BCS with an IPD unit with new vacuum lines to and from it, and whilst we picked up some lost boost (when it works) the problem is still there.

Any ideas? Boost leak somewhere?

oblark
Wednesday 2nd September 2015, 18:57
I'd have a look at the actuator as it sounds like it's sticking.

Sweep
Wednesday 2nd September 2015, 19:38
I'd have a look at the actuator as it sounds like it's sticking.

I'll look into that thanks, is there anything that can be done to free them up or will it (potentially) need replacing?

Saaamon
Wednesday 2nd September 2015, 20:19
If it moves freely by hand you know its ok, should have a smooth feel.

Sweep
Wednesday 2nd September 2015, 20:55
I was always under the impression they were quite stiff so couldn't be done by hand! I'll have a pokey if I get up early enough before work. Thanks chaps.