850 16T turbo replacement ..... Need help ASAP....ADVICE!!!!

[Wheelspinwardrobe]

Hi Everyone

Just acquired a new 16t (angled flange) 3'' with lip edge connection for the downpipe....

I have a straight edge downpipe with a tapered edge...... This has turned in to a complete nightmare and obviously wont fit!!!!! ordered a downpipe and it was still wrong .... PLEASE HELP solve this issue,

I need to find a solution that wont break the bank!!!

where would I get such a downpipe??? doesn't have to be stainless ......

Any idea's peeps....


Thanks Phill

[Jamest5r]

Leave the exhaust side in place and just split the turbo and slide your new cold side in :)

[Ettienne]

Pictures might help, not sure what you mean if you buy correct dp shouldn't be a prob

[Wheelspinwardrobe]

Leave the exhaust side in place and just split the turbo and slide your new cold side in :)

I cant as the exhaust side I have has a crack in it!!!! plus its much smaller than the new exhaust side so not the best thing...

[Wheelspinwardrobe]

Pictures might help, not sure what you mean if you buy correct dp shouldn't be a prob

The point is I cant find one (not interested in a stainless one tbh atm)

[oblark]

It sounds like your downpipe is a standard 850 downpipe with a conical flange,

I think the 3" angled 16T came from a P2 and the P2 downpipe won't fit a 850.

They is two ways to overcome this little problem is to keep your hot side & swap over the cold side or get a custom downpipe.

[Tomcat]

Or if your hot side has a split in it then just obtain another one.

[Wheelspinwardrobe]

It sounds like your downpipe is a standard 850 downpipe with a conical flange,

I think the 3" angled 16T came from a P2 and the P2 downpipe won't fit a 850.

They is two ways to overcome this little problem is to keep your hot side & swap over the cold side or get a custom downpipe.

OH bum... ok...... know anyone with a cold side (15g am i correct?)

[Wheelspinwardrobe]

Where can I get one of these (same as this) in the UK? This is what would help....

http://i311.photobucket.com/albums/kk471/200SX_2008/_57_zpsqewat78f.jpg (http://s311.photobucket.com/user/200SX_2008/media/_57_zpsqewat78f.jpg.html)

[t5 pete]

I've gt a conical hot side

[oblark]

I've gt a conical hot side

You can get some cream for that :)

[t5 pete]

You can get some cream for that :)

Haha