View Full Version : 19T into a 12C
oblark
Friday 13th March 2015, 20:24
The 240 has a 12C fitted and later on once i`ve got it running I want to fit my 19T
To save the ball ache of making a new downpipe will the 19T fit into a 12C exhaust housing ?
Dangerous Dave
Saturday 14th March 2015, 13:44
Do you mean a 13C? As I've not heard of the 12C. Anyway if it is a 13C then it is has the TD04H turbine and the 19t runs a TD04HL turbine which is the largest in the TD04 range.
So it probably won't fit without a turbine housing (which will need clocking as it faces the wrong way to fit onto a red block manifold)
oblark
Saturday 14th March 2015, 18:26
Yeah I meant 13C :) fat fingers and small keys.
I forgot to mention my 19T was made by bigrotch from a 15G
Does that make a difference ?
Ettienne
Saturday 14th March 2015, 18:31
Yeah I meant 13C :) fat fingers and small keys.
I forgot to mention my 19T was made by bigrotch from a 15G
Does that make a difference ?
Same chra just more clearance machined.
Dangerous Dave
Saturday 14th March 2015, 21:26
Yeah I meant 13C :) fat fingers and small keys.
I forgot to mention my 19T was made by bigrotch from a 15G
Does that make a difference ?
As Steve says, the 15G has the same CHRA (just machined a bit) and exhaust turbine (HL variant)
The 13C turbine housing won't fit (H variant), though I don't know how different it is to the HL housing
More here:
http://forums.turbobricks.com/showthread.php?t=96051
oblark
Saturday 14th March 2015, 22:46
It looks like I'll have to make a new downpipe for when I fit the 19t
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.