PDA

View Full Version : P1 ABS issue


Kingsford G
Sunday 25th January 2015, 00:39
I have a pre me7 c70 that has intermittent ABS fault so looking at some used units on ebay they are not the same part numbers. Has anyone changed to a different part number with no problem?Before anyone says it it was already soldered and I did my best with no luck.
Wobbly Dave
Monday 26th January 2015, 12:15
Check your reluctor rings & the integrity of the ABS Sensor wires. If you have a 774 unit then it can be interchanged with the later 265 unit (last 3 digits of the part number). If you don't have TRACS then it can't be done.
Kingsford G
Monday 26th January 2015, 21:25
Check your reluctor rings & the integrity of the ABS Sensor wires. If you have a 774 unit then it can be interchanged with the later 265 unit (last 3 digits of the part number). If you don't have TRACS then it can't be done.

I`ve got the part number written down at work and 265 rings the bell.I do have tracs button as well.Cheers mate.